source: trunk/examples/advanced/composite_calorimeter/src/CCalPrimaryGeneratorMessenger.cc@ 1330

Last change on this file since 1330 was 807, checked in by garnier, 17 years ago

update
File size: 8.2 KB
Line 
1//
2// ********************************************************************
3// * License and Disclaimer *
4// * *
5// * The Geant4 software is copyright of the Copyright Holders of *
6// * the Geant4 Collaboration. It is provided under the terms and *
7// * conditions of the Geant4 Software License, included in the file *
8// * LICENSE and available at http://cern.ch/geant4/license . These *
9// * include a list of copyright holders. *
10// * *
11// * Neither the authors of this software system, nor their employing *
12// * institutes,nor the agencies providing financial support for this *
13// * work make any representation or warranty, express or implied, *
14// * regarding this software system or assume any liability for its *
15// * use. Please see the license in the file LICENSE and URL above *
16// * for the full disclaimer and the limitation of liability. *
17// * *
18// * This code implementation is the result of the scientific and *
19// * technical work of the GEANT4 collaboration. *
20// * By using, copying, modifying or distributing the software (or *
21// * any work based on the software) you agree to acknowledge its *
22// * use in resulting scientific publications, and indicate your *
23// * acceptance of all terms of the Geant4 Software license. *
24// ********************************************************************
25//
26///////////////////////////////////////////////////////////////////////////////
27// File: CCalPrimaryGeneratorMessenger.cc
28// Description: CCalPrimaryGeneratorMessenger adds new commands for
29// primary generator action
30///////////////////////////////////////////////////////////////////////////////
31#include "CCalPrimaryGeneratorMessenger.hh"
32#include "CCalPrimaryGeneratorAction.hh"
33
34#include "G4UImanager.hh"
35#include "G4UIcmdWithAString.hh"
36#include "G4UIcmdWithADoubleAndUnit.hh"
37#include "G4UIcmdWithADouble.hh"
38#include "G4UIcmdWithABool.hh"
39#include "G4UIcmdWithAnInteger.hh"
40#include "globals.hh"
41
42CCalPrimaryGeneratorMessenger::CCalPrimaryGeneratorMessenger(CCalPrimaryGeneratorAction* myGun) : myAction(myGun) {
43
44 verboseCmd = new G4UIcmdWithAnInteger("/CCal/generator/verbose",this);
45 verboseCmd->SetGuidance("set Verbosity level ");
46 verboseCmd->SetParameterName("value",true);
47 verboseCmd->SetDefaultValue(0);
48 verboseCmd->AvailableForStates(G4State_PreInit,G4State_Idle);
49
50 rndmCmd = new G4UIcmdWithAString("/CCal/generator/random",this);
51 rndmCmd->SetGuidance("Choose randomly energy and direction of the incident particle.");
52 rndmCmd->SetGuidance(" Choice : on,off(default)");
53 rndmCmd->SetParameterName("choice",true);
54 rndmCmd->SetDefaultValue("off");
55 rndmCmd->SetCandidates("on off ON OFF");
56 rndmCmd->AvailableForStates(G4State_PreInit,G4State_Idle);
57
58 scanCmd = new G4UIcmdWithAString("/CCal/generator/scan",this);
59 scanCmd->SetGuidance("Scan eta and phi ranges with single incident particle");
60 scanCmd->SetGuidance(" Choice : on,off(default)");
61 scanCmd->SetGuidance(" Ranges : etamin/max, phimin/max are set by other commands ");
62 scanCmd->SetParameterName("choice",true);
63 scanCmd->SetDefaultValue("off");
64 scanCmd->SetCandidates("on off ON OFF");
65 scanCmd->AvailableForStates(G4State_PreInit,G4State_Idle);
66
67 minEnergyCmd = new G4UIcmdWithADoubleAndUnit("/CCal/generator/minEnergy",this);
68 minEnergyCmd->SetGuidance("Set minimum Energy for the incident particle.");
69 minEnergyCmd->SetParameterName("value",true);
70 minEnergyCmd->SetDefaultValue(1.);
71 minEnergyCmd->SetDefaultUnit("GeV");
72 minEnergyCmd->AvailableForStates(G4State_PreInit,G4State_Idle);
73
74 maxEnergyCmd = new G4UIcmdWithADoubleAndUnit("/CCal/generator/maxEnergy",this);
75 maxEnergyCmd->SetGuidance("Set maximum Energy for the incident particle.");
76 maxEnergyCmd->SetParameterName("value",true);
77 maxEnergyCmd->SetDefaultValue(1.);
78 maxEnergyCmd->SetDefaultUnit("TeV");
79 maxEnergyCmd->AvailableForStates(G4State_PreInit,G4State_Idle);
80
81 minPhiCmd = new G4UIcmdWithADoubleAndUnit("/CCal/generator/minPhi",this);
82 minPhiCmd->SetGuidance("Set minimum Phi angle for the incident particle direction");
83 minPhiCmd->SetGuidance(" Choice : from 0 to 2*pi ");
84 minPhiCmd->SetParameterName("value",true);
85 minPhiCmd->SetDefaultValue(0);
86 minPhiCmd->SetDefaultUnit("radian");
87 minPhiCmd->AvailableForStates(G4State_PreInit,G4State_Idle);
88
89 maxPhiCmd = new G4UIcmdWithADoubleAndUnit("/CCal/generator/maxPhi",this);
90 maxPhiCmd->SetGuidance("Set maximum Phi angle for the incident particle direction");
91 maxPhiCmd->SetGuidance(" Choice : from 0 to 2*pi ");
92 maxPhiCmd->SetParameterName("value",true);
93 maxPhiCmd->SetDefaultValue(2.*pi);
94 maxPhiCmd->SetDefaultUnit("radian");
95 maxPhiCmd->AvailableForStates(G4State_PreInit,G4State_Idle);
96
97 stepsPhiCmd = new G4UIcmdWithAnInteger("/CCal/generator/stepsPhi",this);
98 stepsPhiCmd->SetGuidance("number of steps along Phi for scan ");
99 stepsPhiCmd->SetParameterName("value",true);
100 stepsPhiCmd->SetDefaultValue(1);
101 stepsPhiCmd->AvailableForStates(G4State_PreInit,G4State_Idle);
102
103 minEtaCmd = new G4UIcmdWithADouble("/CCal/generator/minEta",this);
104 minEtaCmd->SetGuidance("Set minimum Eta angle for the incident particle direction");
105 minEtaCmd->SetGuidance(" Choice : from 0 to infinity");
106 minEtaCmd->SetParameterName("value",true);
107 minEtaCmd->SetDefaultValue(0);
108 minEtaCmd->AvailableForStates(G4State_PreInit,G4State_Idle);
109
110 maxEtaCmd = new G4UIcmdWithADouble("/CCal/generator/maxEta",this);
111 maxEtaCmd->SetGuidance("Set maximum Eta angle for the incident particle direction");
112 maxEtaCmd->SetGuidance(" Choice : from 0 to infinity");
113 maxEtaCmd->SetParameterName("value",true);
114 maxEtaCmd->SetDefaultValue(3.5);
115 maxEtaCmd->AvailableForStates(G4State_PreInit,G4State_Idle);
116
117 stepsEtaCmd = new G4UIcmdWithAnInteger("/CCal/generator/stepsEta",this);
118 stepsEtaCmd->SetGuidance("number of steps along Eta for scan ");
119 stepsEtaCmd->SetParameterName("value",true);
120 stepsEtaCmd->SetDefaultValue(1);
121 stepsEtaCmd->AvailableForStates(G4State_PreInit,G4State_Idle);
122
123 runNoCmd = new G4UIcmdWithAnInteger("/CCal/generator/runNo",this);
124 runNoCmd->SetGuidance("set the run number ");
125 runNoCmd->SetParameterName("value",true);
126 runNoCmd->SetDefaultValue(0);
127 runNoCmd->AvailableForStates(G4State_PreInit,G4State_Idle);
128
129}
130
131CCalPrimaryGeneratorMessenger::~CCalPrimaryGeneratorMessenger() {
132
133 if (verboseCmd)
134 delete verboseCmd;
135 if (scanCmd)
136 delete rndmCmd;
137 if (scanCmd)
138 delete scanCmd;
139 if (minEnergyCmd)
140 delete minEnergyCmd;
141 if (maxEnergyCmd)
142 delete maxEnergyCmd;
143 if (minPhiCmd)
144 delete minPhiCmd;
145 if (maxPhiCmd)
146 delete maxPhiCmd;
147 if (stepsPhiCmd)
148 delete stepsPhiCmd;
149 if (minEtaCmd)
150 delete minEtaCmd;
151 if (maxEtaCmd)
152 delete maxEtaCmd;
153 if (stepsEtaCmd)
154 delete stepsEtaCmd;
155 if (runNoCmd)
156 delete runNoCmd;
157
158}
159
160void CCalPrimaryGeneratorMessenger::SetNewValue(G4UIcommand * command,
161 G4String newValues) {
162 if (command == verboseCmd)
163 myAction->SetVerboseLevel(verboseCmd->GetNewIntValue(newValues));
164 else if (command == rndmCmd)
165 myAction->SetRandom(newValues);
166 else if (command == scanCmd)
167 myAction->SetScan(newValues);
168 else if (command == minEnergyCmd)
169 myAction->SetMinimumEnergy(minEnergyCmd->GetNewDoubleValue(newValues));
170 else if (command == maxEnergyCmd)
171 myAction->SetMaximumEnergy(maxEnergyCmd->GetNewDoubleValue(newValues));
172 else if (command == minPhiCmd)
173 myAction->SetMinimumPhi(minPhiCmd->GetNewDoubleValue(newValues));
174 else if (command == maxPhiCmd)
175 myAction->SetMaximumPhi(maxPhiCmd->GetNewDoubleValue(newValues));
176 else if (command == stepsPhiCmd)
177 myAction->SetStepsPhi(stepsPhiCmd->GetNewIntValue(newValues));
178 else if (command == minEtaCmd)
179 myAction->SetMinimumEta(minEtaCmd->GetNewDoubleValue(newValues));
180 else if (command == maxEtaCmd)
181 myAction->SetMaximumEta(maxEtaCmd->GetNewDoubleValue(newValues));
182 else if (command == stepsEtaCmd)
183 myAction->SetStepsEta(stepsEtaCmd->GetNewIntValue(newValues));
184 else if (command == runNoCmd)
185 myAction->SetRunNo(runNoCmd->GetNewIntValue(newValues));
186
187}
Note: See TracBrowser for help on using the repository browser.