source: trunk/source/geometry/solids/CSG/src/G4Cons.cc@ 1089

//
// ********************************************************************
// * License and Disclaimer                                           *
// *                                                                  *
// * The  Geant4 software  is  copyright of the Copyright Holders  of *
// * the Geant4 Collaboration.  It is provided  under  the terms  and *
// * conditions of the Geant4 Software License,  included in the file *
// * LICENSE and available at  http://cern.ch/geant4/license .  These *
// * include a list of copyright holders.                             *
// *                                                                  *
// * Neither the authors of this software system, nor their employing *
// * institutes,nor the agencies providing financial support for this *
// * work  make  any representation or  warranty, express or implied, *
// * regarding  this  software system or assume any liability for its *
// * use.  Please see the license in the file  LICENSE  and URL above *
// * for the full disclaimer and the limitation of liability.         *
// *                                                                  *
// * This  code  implementation is the result of  the  scientific and *
// * technical work of the GEANT4 collaboration.                      *
// * By using,  copying,  modifying or  distributing the software (or *
// * any work based  on the software)  you  agree  to acknowledge its *
// * use  in  resulting  scientific  publications,  and indicate your *
// * acceptance of all terms of the Geant4 Software license.          *
// ********************************************************************
//
//
// $Id: G4Cons.cc,v 1.60 2008/11/06 15:26:53 gcosmo Exp $
// GEANT4 tag $Name: geant4-09-02-ref-02 $
//
//
// class G4Cons
//
// Implementation for G4Cons class
//
// History:
//
// 03.05.05 V.Grichine: SurfaceNormal(p) according to J. Apostolakis proposal
// 13.09.96 V.Grichine: Review and final modifications
// ~1994    P.Kent: Created, as main part of the geometry prototype
// --------------------------------------------------------------------

#include "G4Cons.hh"

#include "G4VoxelLimits.hh"
#include "G4AffineTransform.hh"
#include "G4GeometryTolerance.hh"

#include "G4VPVParameterisation.hh"

#include "meshdefs.hh"

#include "Randomize.hh"

#include "G4VGraphicsScene.hh"
#include "G4Polyhedron.hh"
#include "G4NURBS.hh"
#include "G4NURBSbox.hh"

using namespace CLHEP;
 
////////////////////////////////////////////////////////////////////////
//
// Private enum: Not for external use - used by distanceToOut

enum ESide {kNull,kRMin,kRMax,kSPhi,kEPhi,kPZ,kMZ};

// used by normal

enum ENorm {kNRMin,kNRMax,kNSPhi,kNEPhi,kNZ};

//////////////////////////////////////////////////////////////////////////
//
// constructor - check parameters, convert angles so 0<sphi+dpshi<=2_PI
//               - note if pDPhi>2PI then reset to 2PI

G4Cons::G4Cons( const G4String& pName,
                      G4double  pRmin1, G4double pRmax1,
                      G4double  pRmin2, G4double pRmax2,
                      G4double pDz,
                      G4double pSPhi, G4double pDPhi)
  : G4CSGSolid(pName)
{
  // Check z-len

  kRadTolerance = G4GeometryTolerance::GetInstance()->GetRadialTolerance();
  kAngTolerance = G4GeometryTolerance::GetInstance()->GetAngularTolerance();

  if ( pDz > 0 )
  {
    fDz = pDz;
  }
  else
  {
    G4cerr << "ERROR - G4Cons()::G4Cons(): " << GetName() << G4endl
           << "        Negative Z half-length ! - "
           << pDz << G4endl;
    G4Exception("G4Cons::G4Cons()", "InvalidSetup",
                FatalException, "Invalid Z half-length.");
  }

  // Check radii

  if ( (pRmin1<pRmax1) && (pRmin2<pRmax2) && (pRmin1>=0) && (pRmin2>=0) )
  {

    fRmin1 = pRmin1 ; 
    fRmax1 = pRmax1 ;
    fRmin2 = pRmin2 ; 
    fRmax2 = pRmax2 ;
    if( (pRmin1 == 0.0) && (pRmin2 > 0.0) ) { fRmin1 = 1e3*kRadTolerance ; }
    if( (pRmin2 == 0.0) && (pRmin1 > 0.0) ) { fRmin2 = 1e3*kRadTolerance ; }
  }
  else
  {
    G4cerr << "ERROR - G4Cons()::G4Cons(): " << GetName() << G4endl
           << "        Invalide values for radii ! - "
           << "        pRmin1 = " << pRmin1 << ", pRmin2 = " << pRmin2
           << ", pRmax1 = " << pRmax1 << ", pRmax2 = " << pRmax2 << G4endl;
    G4Exception("G4Cons::G4Cons()", "InvalidSetup",
                FatalException, "Invalid radii.") ;
  }

  fPhiFullCone = true;
  if ( pDPhi >= twopi-kAngTolerance*0.5 ) // Check angles
  {
    fDPhi=twopi;
    fSPhi=0;
  }
  else
  {
    fPhiFullCone = false;
    if ( pDPhi > 0 )
    {
      fDPhi = pDPhi;
    }
    else
    {
      G4cerr << "ERROR - G4Cons()::G4Cons(): " << GetName() << G4endl
             << "        Negative delta-Phi ! - "
             << pDPhi << G4endl;
      G4Exception("G4Cons::G4Cons()", "InvalidSetup",
                  FatalException, "Invalid dphi.");
    }

    // Ensure fSphi in 0-2PI or -2PI-0 range if shape crosses 0

    if ( pSPhi < 0 )
    {
      fSPhi = twopi - std::fmod(std::fabs(pSPhi),twopi);
    }
    else
    {
      fSPhi = std::fmod(pSPhi,twopi) ;
    }
    if ( fSPhi+fDPhi > twopi )
    {
      fSPhi -= twopi ;
    }
  }
  InitializeTrigonometry();
}

///////////////////////////////////////////////////////////////////////
//
// Fake default constructor - sets only member data and allocates memory
//                            for usage restricted to object persistency.
//
G4Cons::G4Cons( __void__& a )
  : G4CSGSolid(a)
{
}

///////////////////////////////////////////////////////////////////////
//
// Destructor

G4Cons::~G4Cons()
{
}

/////////////////////////////////////////////////////////////////////
//
// Return whether point inside/outside/on surface

EInside G4Cons::Inside(const G4ThreeVector& p) const
{
  G4double r2, rl, rh, pPhi, tolRMin, tolRMax; // rh2, rl2 ;
  EInside in;
  static const G4double halfCarTolerance=kCarTolerance*0.5;
  static const G4double halfRadTolerance=kRadTolerance*0.5;
  static const G4double halfAngTolerance=kAngTolerance*0.5;

  if (std::fabs(p.z()) > fDz + halfCarTolerance )  { return in = kOutside; }
  else if(std::fabs(p.z()) >= fDz - halfCarTolerance )    { in = kSurface; }
  else                                                    { in = kInside;  }

  r2 = p.x()*p.x() + p.y()*p.y() ;
  rl = 0.5*(fRmin2*(p.z() + fDz) + fRmin1*(fDz - p.z()))/fDz ;
  rh = 0.5*(fRmax2*(p.z()+fDz)+fRmax1*(fDz-p.z()))/fDz;

  // rh2 = rh*rh;

  tolRMin = rl - halfRadTolerance;
  if ( tolRMin < 0 )  { tolRMin = 0; }
  tolRMax = rh + halfRadTolerance;

  if ( (r2<tolRMin*tolRMin) || (r2>tolRMax*tolRMax) ) { return in = kOutside; }

  if (rl) { tolRMin = rl + halfRadTolerance; }
  else    { tolRMin = 0.0; }
  tolRMax = rh - halfRadTolerance;
      
  if (in == kInside) // else it's kSurface already
  {
     if ( (r2 < tolRMin*tolRMin) || (r2 >= tolRMax*tolRMax) ) { in = kSurface; }
  }
  if ( !fPhiFullCone && ((p.x() != 0.0) || (p.y() != 0.0)) )
  {
    pPhi = std::atan2(p.y(),p.x()) ;

    if ( pPhi < fSPhi - halfAngTolerance  )             { pPhi += twopi; }
    else if ( pPhi > fSPhi + fDPhi + halfAngTolerance ) { pPhi -= twopi; }
    
    if ( (pPhi < fSPhi - halfAngTolerance) ||          
         (pPhi > fSPhi + fDPhi + halfAngTolerance) )  { return in = kOutside; }
      
    else if (in == kInside)  // else it's kSurface anyway already
    {
       if ( (pPhi < fSPhi + halfAngTolerance) || 
            (pPhi > fSPhi + fDPhi - halfAngTolerance) )  { in = kSurface; }
    }
  }
  else if ( !fPhiFullCone )  { in = kSurface; }

  return in ;
}

/////////////////////////////////////////////////////////////////////////
//
// Dispatch to parameterisation for replication mechanism dimension
// computation & modification.

void G4Cons::ComputeDimensions(      G4VPVParameterisation* p,
                               const G4int                  n,
                               const G4VPhysicalVolume*     pRep    )
{
  p->ComputeDimensions(*this,n,pRep) ;
}


///////////////////////////////////////////////////////////////////////////
//
// Calculate extent under transform and specified limit

G4bool G4Cons::CalculateExtent( const EAxis              pAxis,
              const G4VoxelLimits&     pVoxelLimit,
              const G4AffineTransform& pTransform,
                    G4double&          pMin,
                    G4double&          pMax  ) const
{
  if ( !pTransform.IsRotated() && (fDPhi == twopi)
    && (fRmin1 == 0) && (fRmin2 == 0) )
  {
    // Special case handling for unrotated solid cones
    // Compute z/x/y mins and maxs for bounding box respecting limits,
    // with early returns if outside limits. Then switch() on pAxis,
    // and compute exact x and y limit for x/y case
      
    G4double xoffset, xMin, xMax ;
    G4double yoffset, yMin, yMax ;
    G4double zoffset, zMin, zMax ;

    G4double diff1, diff2, maxDiff, newMin, newMax, RMax ;
    G4double xoff1, xoff2, yoff1, yoff2 ;
      
    zoffset = pTransform.NetTranslation().z();
    zMin    = zoffset - fDz ;
    zMax    = zoffset + fDz ;

    if (pVoxelLimit.IsZLimited())
    {
      if( (zMin > pVoxelLimit.GetMaxZExtent() + kCarTolerance) || 
          (zMax < pVoxelLimit.GetMinZExtent() - kCarTolerance)  )
      {
        return false ;
      }
      else
      {
        if ( zMin < pVoxelLimit.GetMinZExtent() )
        {
          zMin = pVoxelLimit.GetMinZExtent() ;
        }
        if ( zMax > pVoxelLimit.GetMaxZExtent() )
        {
          zMax = pVoxelLimit.GetMaxZExtent() ;
        }
      }
    }
    xoffset = pTransform.NetTranslation().x() ;
    RMax    = (fRmax2 >= fRmax1) ?  zMax : zMin  ;                  
    xMax    = xoffset + (fRmax1 + fRmax2)*0.5 + 
              (RMax - zoffset)*(fRmax2 - fRmax1)/(2*fDz) ;
    xMin    = 2*xoffset-xMax ;

    if (pVoxelLimit.IsXLimited())
    {
      if ( (xMin > pVoxelLimit.GetMaxXExtent() + kCarTolerance) || 
           (xMax < pVoxelLimit.GetMinXExtent() - kCarTolerance)  )
      {
        return false ;
      }
      else
      {
        if ( xMin < pVoxelLimit.GetMinXExtent() )
        {
          xMin = pVoxelLimit.GetMinXExtent() ;
        }
        if ( xMax > pVoxelLimit.GetMaxXExtent() )
        {
          xMax=pVoxelLimit.GetMaxXExtent() ;
        }
      }
    }
    yoffset = pTransform.NetTranslation().y() ;
    yMax    = yoffset + (fRmax1 + fRmax2)*0.5 + 
              (RMax - zoffset)*(fRmax2 - fRmax1)/(2*fDz) ;
    yMin    = 2*yoffset-yMax ;
    RMax    = yMax - yoffset ;  // = max radius due to Zmax/Zmin cuttings

    if (pVoxelLimit.IsYLimited())
    {
      if ( (yMin > pVoxelLimit.GetMaxYExtent() + kCarTolerance) || 
           (yMax < pVoxelLimit.GetMinYExtent() - kCarTolerance)  )
      {
        return false ;
      }
      else
      {
        if ( yMin < pVoxelLimit.GetMinYExtent() )
        {
          yMin = pVoxelLimit.GetMinYExtent() ;
        }
        if ( yMax > pVoxelLimit.GetMaxYExtent() )
        {
          yMax = pVoxelLimit.GetMaxYExtent() ;
        }
      }
    }    
    switch (pAxis) // Known to cut cones
    {
      case kXAxis:
        yoff1 = yoffset - yMin ;
        yoff2 = yMax - yoffset ;

        if ((yoff1 >= 0) && (yoff2 >= 0)) // Y limits cross max/min x
        {                                 // => no change
          pMin = xMin ;
          pMax = xMax ;
        }
        else
        {
          // Y limits don't cross max/min x => compute max delta x,
          // hence new mins/maxs
         
          diff1   = std::sqrt(RMax*RMax - yoff1*yoff1) ;
          diff2   = std::sqrt(RMax*RMax - yoff2*yoff2) ;
          maxDiff = (diff1>diff2) ? diff1:diff2 ;
          newMin  = xoffset - maxDiff ;
          newMax  = xoffset + maxDiff ;
          pMin    = ( newMin < xMin ) ? xMin : newMin  ;
          pMax    = ( newMax > xMax) ? xMax : newMax ;
        } 
      break ;

      case kYAxis:
        xoff1 = xoffset - xMin ;
        xoff2 = xMax - xoffset ;

        if ((xoff1 >= 0) && (xoff2 >= 0) ) // X limits cross max/min y
        {                                  // => no change
          pMin = yMin ;
          pMax = yMax ;
        }
        else
        {
          // X limits don't cross max/min y => compute max delta y,
          // hence new mins/maxs

          diff1   = std::sqrt(RMax*RMax - xoff1*xoff1) ;
          diff2   = std::sqrt(RMax*RMax-xoff2*xoff2) ;
          maxDiff = (diff1 > diff2) ? diff1:diff2 ;
          newMin  = yoffset - maxDiff ;
          newMax  = yoffset + maxDiff ;
          pMin    = (newMin < yMin) ? yMin : newMin ;
          pMax    = (newMax > yMax) ? yMax : newMax ;
        }
      break ;

      case kZAxis:
        pMin = zMin ;
        pMax = zMax ;
      break ;
      
      default:
      break ;
    }
    pMin -= kCarTolerance ;
    pMax += kCarTolerance ;

    return true ;
  }
  else   // Calculate rotated vertex coordinates
  {
    G4int i, noEntries, noBetweenSections4 ;
    G4bool existsAfterClip = false ;
    G4ThreeVectorList* vertices = CreateRotatedVertices(pTransform) ;

    pMin = +kInfinity ;
    pMax = -kInfinity ;

    noEntries          = vertices->size() ;
    noBetweenSections4 = noEntries-4 ;
      
    for ( i = 0 ; i < noEntries ; i += 4 )
    {
      ClipCrossSection(vertices, i, pVoxelLimit, pAxis, pMin, pMax) ;
    }
    for ( i = 0 ; i < noBetweenSections4 ; i += 4 )
    {
      ClipBetweenSections(vertices, i, pVoxelLimit, pAxis, pMin, pMax) ;
    }    
    if ( (pMin != kInfinity) || (pMax != -kInfinity) )
    {
      existsAfterClip = true ;
        
      // Add 2*tolerance to avoid precision troubles

      pMin -= kCarTolerance ;
      pMax += kCarTolerance ;
    }
    else
    {
      // Check for case where completely enveloping clipping volume
      // If point inside then we are confident that the solid completely
      // envelopes the clipping volume. Hence set min/max extents according
      // to clipping volume extents along the specified axis.
       
      G4ThreeVector clipCentre(
      (pVoxelLimit.GetMinXExtent() + pVoxelLimit.GetMaxXExtent())*0.5,
      (pVoxelLimit.GetMinYExtent() + pVoxelLimit.GetMaxYExtent())*0.5,
      (pVoxelLimit.GetMinZExtent() + pVoxelLimit.GetMaxZExtent())*0.5  ) ;
        
      if (Inside(pTransform.Inverse().TransformPoint(clipCentre)) != kOutside)
      {
        existsAfterClip = true ;
        pMin            = pVoxelLimit.GetMinExtent(pAxis) ;
        pMax            = pVoxelLimit.GetMaxExtent(pAxis) ;
      }
    }
    delete vertices ;
    return existsAfterClip ;
  }
}

////////////////////////////////////////////////////////////////////////
//
// Return unit normal of surface closest to p
// - note if point on z axis, ignore phi divided sides
// - unsafe if point close to z axis a rmin=0 - no explicit checks

G4ThreeVector G4Cons::SurfaceNormal( const G4ThreeVector& p) const
{
  G4int noSurfaces = 0;
  G4double rho, pPhi;
  G4double distZ, distRMin, distRMax;
  G4double distSPhi = kInfinity, distEPhi = kInfinity;
  G4double tanRMin, secRMin, pRMin, widRMin;
  G4double tanRMax, secRMax, pRMax, widRMax;

  static const G4double delta  = 0.5*kCarTolerance;
  static const G4double dAngle = 0.5*kAngTolerance;
  
  G4ThreeVector norm, sumnorm(0.,0.,0.), nZ = G4ThreeVector(0.,0.,1.);
  G4ThreeVector nR, nr(0.,0.,0.), nPs, nPe;

  distZ = std::fabs(std::fabs(p.z()) - fDz);
  rho   = std::sqrt(p.x()*p.x() + p.y()*p.y());

  tanRMin  = (fRmin2 - fRmin1)*0.5/fDz;
  secRMin  = std::sqrt(1 + tanRMin*tanRMin);
  pRMin    = rho - p.z()*tanRMin;
  widRMin  = fRmin2 - fDz*tanRMin;
  distRMin = std::fabs(pRMin - widRMin)/secRMin;

  tanRMax  = (fRmax2 - fRmax1)*0.5/fDz;
  secRMax  = std::sqrt(1+tanRMax*tanRMax);
  pRMax    = rho - p.z()*tanRMax;
  widRMax  = fRmax2 - fDz*tanRMax;
  distRMax = std::fabs(pRMax - widRMax)/secRMax;

  if (!fPhiFullCone)   // Protected against (0,0,z) 
  {
    if ( rho )
    {
      pPhi = std::atan2(p.y(),p.x());

      if (pPhi  < fSPhi-delta)            { pPhi += twopi; }
      else if (pPhi > fSPhi+fDPhi+delta)  { pPhi -= twopi; }

      distSPhi = std::fabs( pPhi - fSPhi ); 
      distEPhi = std::fabs( pPhi - fSPhi - fDPhi ); 
    }
    else if( !(fRmin1) || !(fRmin2) )
    {
      distSPhi = 0.; 
      distEPhi = 0.; 
    }
    nPs = G4ThreeVector(std::sin(fSPhi), -std::cos(fSPhi), 0);
    nPe = G4ThreeVector(-std::sin(fSPhi+fDPhi), std::cos(fSPhi+fDPhi), 0);
  }
  if ( rho > delta )   
  {
    nR = G4ThreeVector(p.x()/rho/secRMax, p.y()/rho/secRMax, -tanRMax/secRMax);
    if (fRmin1 || fRmin2)
    {
      nr = G4ThreeVector(-p.x()/rho/secRMin,-p.y()/rho/secRMin,tanRMin/secRMin);
    }
  }

  if( distRMax <= delta )
  {
    noSurfaces ++;
    sumnorm += nR;
  }
  if( (fRmin1 || fRmin2) && (distRMin <= delta) )
  {
    noSurfaces ++;
    sumnorm += nr;
  }
  if( !fPhiFullCone )   
  {
    if (distSPhi <= dAngle)
    {
      noSurfaces ++;
      sumnorm += nPs;
    }
    if (distEPhi <= dAngle) 
    {
      noSurfaces ++;
      sumnorm += nPe;
    }
  }
  if (distZ <= delta)  
  {
    noSurfaces ++;
    if ( p.z() >= 0.)  { sumnorm += nZ; }
    else               { sumnorm -= nZ; }
  }
  if ( noSurfaces == 0 )
  {
#ifdef G4CSGDEBUG
    G4Exception("G4Cons::SurfaceNormal(p)", "Notification", JustWarning, 
                "Point p is not on surface !?" );
#endif 
     norm = ApproxSurfaceNormal(p);
  }
  else if ( noSurfaces == 1 )  { norm = sumnorm; }
  else                         { norm = sumnorm.unit(); }

  return norm ;
}

////////////////////////////////////////////////////////////////////////////
//
// Algorithm for SurfaceNormal() following the original specification
// for points not on the surface

G4ThreeVector G4Cons::ApproxSurfaceNormal( const G4ThreeVector& p ) const
{
  ENorm side ;
  G4ThreeVector norm ;
  G4double rho, phi ;
  G4double distZ, distRMin, distRMax, distSPhi, distEPhi, distMin ;
  G4double tanRMin, secRMin, pRMin, widRMin ;
  G4double tanRMax, secRMax, pRMax, widRMax ;

  distZ = std::fabs(std::fabs(p.z()) - fDz) ;
  rho   = std::sqrt(p.x()*p.x() + p.y()*p.y()) ;

  tanRMin  = (fRmin2 - fRmin1)*0.5/fDz ;
  secRMin  = std::sqrt(1 + tanRMin*tanRMin) ;
  pRMin    = rho - p.z()*tanRMin ;
  widRMin  = fRmin2 - fDz*tanRMin ;
  distRMin = std::fabs(pRMin - widRMin)/secRMin ;

  tanRMax  = (fRmax2 - fRmax1)*0.5/fDz ;
  secRMax  = std::sqrt(1+tanRMax*tanRMax) ;
  pRMax    = rho - p.z()*tanRMax ;
  widRMax  = fRmax2 - fDz*tanRMax ;
  distRMax = std::fabs(pRMax - widRMax)/secRMax ;
  
  if (distRMin < distRMax)  // First minimum
  {
    if (distZ < distRMin)
    {
      distMin = distZ ;
      side    = kNZ ;
    }
    else
    {
      distMin = distRMin ;
      side    = kNRMin ;
    }
  }
  else
  {
    if (distZ < distRMax)
    {
      distMin = distZ ;
      side    = kNZ ;
    }
    else
    {
      distMin = distRMax ;
      side    = kNRMax ;
    }
  }
  if ( !fPhiFullCone && rho )  // Protected against (0,0,z) 
  {
    phi = std::atan2(p.y(),p.x()) ;

    if (phi < 0)  { phi += twopi; }

    if (fSPhi < 0)  { distSPhi = std::fabs(phi - (fSPhi + twopi))*rho; }
    else            { distSPhi = std::fabs(phi - fSPhi)*rho; }

    distEPhi = std::fabs(phi - fSPhi - fDPhi)*rho ;

    // Find new minimum

    if (distSPhi < distEPhi)
    {
      if (distSPhi < distMin)  { side = kNSPhi; }
    }
    else 
    {
      if (distEPhi < distMin)  { side = kNEPhi; }
    }
  }    
  switch (side)
  {
    case kNRMin:      // Inner radius
      rho *= secRMin ;
      norm = G4ThreeVector(-p.x()/rho, -p.y()/rho, tanRMin/secRMin) ;
      break ;
    case kNRMax:      // Outer radius
      rho *= secRMax ;
      norm = G4ThreeVector(p.x()/rho, p.y()/rho, -tanRMax/secRMax) ;
      break ;
    case kNZ:      // +/- dz
      if (p.z() > 0)  { norm = G4ThreeVector(0,0,1);  }
      else            { norm = G4ThreeVector(0,0,-1); }
      break ;
    case kNSPhi:
      norm = G4ThreeVector(std::sin(fSPhi), -std::cos(fSPhi), 0) ;
      break ;
    case kNEPhi:
      norm=G4ThreeVector(-std::sin(fSPhi+fDPhi), std::cos(fSPhi+fDPhi), 0) ;
      break ;
    default:
      DumpInfo();
      G4Exception("G4Cons::ApproxSurfaceNormal()", "Notification", JustWarning,
                  "Undefined side for valid surface normal to solid.") ;
      break ;    
  }
  return norm ;
}

////////////////////////////////////////////////////////////////////////
//
// Calculate distance to shape from outside, along normalised vector
// - return kInfinity if no intersection, or intersection distance <= tolerance
//
// - Compute the intersection with the z planes 
//        - if at valid r, phi, return
//
// -> If point is outside cone, compute intersection with rmax1*0.5
//        - if at valid phi,z return
//        - if inside outer cone, handle case when on tolerant outer cone
//          boundary and heading inwards(->0 to in)
//
// -> Compute intersection with inner cone, taking largest +ve root
//        - if valid (in z,phi), save intersction
//
//    -> If phi segmented, compute intersections with phi half planes
//        - return smallest of valid phi intersections and
//          inner radius intersection
//
// NOTE:
// - `if valid' implies tolerant checking of intersection points
// - z, phi intersection from Tubs

G4double G4Cons::DistanceToIn( const G4ThreeVector& p,
                               const G4ThreeVector& v   ) const
{
  G4double snxt = kInfinity ;      // snxt = default return value

  static const G4double halfCarTolerance=kCarTolerance*0.5;
  static const G4double halfRadTolerance=kRadTolerance*0.5;

  G4double tanRMax,secRMax,rMaxAv,rMaxOAv ;  // Data for cones
  G4double tanRMin,secRMin,rMinAv,rMinIAv,rMinOAv ;
  G4double rout,rin ;

  G4double tolORMin,tolORMin2,tolIRMin,tolIRMin2 ; // `generous' radii squared
  G4double tolORMax2,tolIRMax,tolIRMax2 ;
  G4double tolODz,tolIDz ;

  G4double Dist,s,xi,yi,zi,ri=0.,rhoi2,cosPsi ; // Intersection point variables

  G4double t1,t2,t3,b,c,d ;    // Quadratic solver variables 
  G4double nt1,nt2,nt3 ;
  G4double Comp ;

  // Cone Precalcs

  tanRMin = (fRmin2 - fRmin1)*0.5/fDz ;
  secRMin = std::sqrt(1.0 + tanRMin*tanRMin) ;
  rMinAv  = (fRmin1 + fRmin2)*0.5 ;

  if (rMinAv > halfRadTolerance)
  {
    rMinOAv = rMinAv - halfRadTolerance ;
    rMinIAv = rMinAv + halfRadTolerance ;
  }
  else
  {
    rMinOAv = 0.0 ;
    rMinIAv = 0.0 ;
  }  
  tanRMax = (fRmax2 - fRmax1)*0.5/fDz ;
  secRMax = std::sqrt(1.0 + tanRMax*tanRMax) ;
  rMaxAv  = (fRmax1 + fRmax2)*0.5 ;
  rMaxOAv = rMaxAv + halfRadTolerance ;
   
  // Intersection with z-surfaces

  tolIDz = fDz - halfCarTolerance ;
  tolODz = fDz + halfCarTolerance ;

  if (std::fabs(p.z()) >= tolIDz)
  {
    if ( p.z()*v.z() < 0 )    // at +Z going in -Z or visa versa
    {
      s = (std::fabs(p.z()) - fDz)/std::fabs(v.z()) ;  // Z intersect distance

      if( s < 0.0 )  { s = 0.0; }                      // negative dist -> zero

      xi   = p.x() + s*v.x() ;  // Intersection coords
      yi   = p.y() + s*v.y() ;
      rhoi2 = xi*xi + yi*yi  ;

      // Check validity of intersection
      // Calculate (outer) tolerant radi^2 at intersecion

      if (v.z() > 0)
      {
        tolORMin  = fRmin1 - halfRadTolerance*secRMin ;
        tolIRMin  = fRmin1 + halfRadTolerance*secRMin ;
        tolIRMax  = fRmax1 - halfRadTolerance*secRMin ;
        tolORMax2 = (fRmax1 + halfRadTolerance*secRMax)*
                    (fRmax1 + halfRadTolerance*secRMax) ;
      }
      else
      {
        tolORMin  = fRmin2 - halfRadTolerance*secRMin ;
        tolIRMin  = fRmin2 + halfRadTolerance*secRMin ;
        tolIRMax  = fRmax2 - halfRadTolerance*secRMin ;
        tolORMax2 = (fRmax2 + halfRadTolerance*secRMax)*
                    (fRmax2 + halfRadTolerance*secRMax) ;
      }
      if ( tolORMin > 0 ) 
      {
        tolORMin2 = tolORMin*tolORMin ;
        tolIRMin2 = tolIRMin*tolIRMin ;
      }
      else                
      {
        tolORMin2 = 0.0 ;
        tolIRMin2 = 0.0 ;
      }
      if ( tolIRMax > 0 )  { tolIRMax2 = tolIRMax*tolIRMax; }     
      else                 { tolIRMax2 = 0.0; }
      
      if ( (tolIRMin2 <= rhoi2) && (rhoi2 <= tolIRMax2) )
      {
        if ( !fPhiFullCone && rhoi2 )
        {
          // Psi = angle made with central (average) phi of shape

          cosPsi = (xi*cosCPhi + yi*sinCPhi)/std::sqrt(rhoi2) ;

          if (cosPsi >= cosHDPhiIT)  { return s; }
        }
        else
        {
          return s;
        }
      }
    }
    else  // On/outside extent, and heading away  -> cannot intersect
    {
      return snxt ;  
    }
  }
    
// ----> Can not intersect z surfaces


// Intersection with outer cone (possible return) and
//                   inner cone (must also check phi)
//
// Intersection point (xi,yi,zi) on line x=p.x+t*v.x etc.
//
// Intersects with x^2+y^2=(a*z+b)^2
//
// where a=tanRMax or tanRMin
//       b=rMaxAv  or rMinAv
//
// (vx^2+vy^2-(a*vz)^2)t^2+2t(pxvx+pyvy-a*vz(a*pz+b))+px^2+py^2-(a*pz+b)^2=0 ;
//     t1                        t2                      t3  
//
//  \--------u-------/       \-----------v----------/ \---------w--------/
//

  t1   = 1.0 - v.z()*v.z() ;
  t2   = p.x()*v.x() + p.y()*v.y() ;
  t3   = p.x()*p.x() + p.y()*p.y() ;
  rin  = tanRMin*p.z() + rMinAv ;
  rout = tanRMax*p.z() + rMaxAv ;

  // Outer Cone Intersection
  // Must be outside/on outer cone for valid intersection

  nt1 = t1 - (tanRMax*v.z())*(tanRMax*v.z()) ;
  nt2 = t2 - tanRMax*v.z()*rout ;
  nt3 = t3 - rout*rout ;

  if (std::fabs(nt1) > kRadTolerance)  // Equation quadratic => 2 roots
  {
    b = nt2/nt1;
    c = nt3/nt1;
    d = b*b-c  ;
    if ( (nt3 > rout*kRadTolerance*secRMax) || (rout < 0) )
    {
      // If outside real cone (should be rho-rout>kRadTolerance*0.5
      // NOT rho^2 etc) saves a std::sqrt() at expense of accuracy

      if (d >= 0)
      {
          
        if ((rout < 0) && (nt3 <= 0))
        {
          // Inside `shadow cone' with -ve radius
          // -> 2nd root could be on real cone

          s = -b + std::sqrt(d) ;
        }
        else
        {
          if ((b <= 0) && (c >= 0)) // both >=0, try smaller root
          {
            s = -b - std::sqrt(d) ;
          }
          else
          {
            if ( c <= 0 ) // second >=0
            {
              s = -b + std::sqrt(d) ;
            }
            else  // both negative, travel away
            {
              return kInfinity ;
            }
          }
        }
        if ( s > 0 )  // If 'forwards'. Check z intersection
        {
          zi = p.z() + s*v.z() ;

          if (std::fabs(zi) <= tolODz)
          {
            // Z ok. Check phi intersection if reqd

            if ( fPhiFullCone )  { return s; }
            else
            {
              xi     = p.x() + s*v.x() ;
              yi     = p.y() + s*v.y() ;
              ri     = rMaxAv + zi*tanRMax ;
              cosPsi = (xi*cosCPhi + yi*sinCPhi)/ri ;

              if ( cosPsi >= cosHDPhiIT )  { return s; }
            }
          }
        }                // end if (s>0)
      }
    }
    else
    {
      // Inside outer cone
      // check not inside, and heading through G4Cons (-> 0 to in)

      if ( ( t3  > (rin + halfRadTolerance*secRMin)*
                   (rin + halfRadTolerance*secRMin) )
        && (nt2 < 0) && (d >= 0) && (std::fabs(p.z()) <= tolIDz) )
      {
        // Inside cones, delta r -ve, inside z extent

        if ( !fPhiFullCone )
        {
          cosPsi = (p.x()*cosCPhi + p.y()*sinCPhi)/std::sqrt(t3) ;

          if (cosPsi >= cosHDPhiIT)  { return 0.0; }
        }
        else  { return 0.0; }
      }
    }
  }
  else  //  Single root case 
  {
    if ( std::fabs(nt2) > kRadTolerance )
    {
      s = -0.5*nt3/nt2 ;

      if ( s < 0 )  { return kInfinity; }   // travel away
      else  // s >= 0,  If 'forwards'. Check z intersection
      {
        zi = p.z() + s*v.z() ;

        if ((std::fabs(zi) <= tolODz) && (nt2 < 0))
        {
          // Z ok. Check phi intersection if reqd

          if ( fPhiFullCone )  { return s; }
          else
          {
            xi     = p.x() + s*v.x() ;
            yi     = p.y() + s*v.y() ;
            ri     = rMaxAv + zi*tanRMax ;
            cosPsi = (xi*cosCPhi + yi*sinCPhi)/ri ;

            if (cosPsi >= cosHDPhiIT)  { return s; }
          }
        }
      }
    }
    else  //    travel || cone surface from its origin
    {
      s = kInfinity ;
    }
  }

  // Inner Cone Intersection
  // o Space is divided into 3 areas:
  //   1) Radius greater than real inner cone & imaginary cone & outside
  //      tolerance
  //   2) Radius less than inner or imaginary cone & outside tolarance
  //   3) Within tolerance of real or imaginary cones
  //      - Extra checks needed for 3's intersections
  //        => lots of duplicated code

  if (rMinAv)
  {
    nt1 = t1 - (tanRMin*v.z())*(tanRMin*v.z()) ;
    nt2 = t2 - tanRMin*v.z()*rin ;
    nt3 = t3 - rin*rin ;
 
    if ( nt1 )
    {
      if ( nt3 > rin*kRadTolerance*secRMin )
      {
        // At radius greater than real & imaginary cones
        // -> 2nd root, with zi check

        b = nt2/nt1 ;
        c = nt3/nt1 ;
        d = b*b-c ;
        if (d >= 0)   // > 0
        {
          s = -b + std::sqrt(d) ;

          if ( s >= 0 )   // > 0
          {
            zi = p.z() + s*v.z() ;

            if ( std::fabs(zi) <= tolODz )
            {
              if ( !fPhiFullCone )
              {
                xi     = p.x() + s*v.x() ;
                yi     = p.y() + s*v.y() ;
                ri     = rMinAv + zi*tanRMin ;
                cosPsi = (xi*cosCPhi + yi*sinCPhi)/ri ;

                if (cosPsi >= cosHDPhiIT)  { snxt = s; }
              }
              else  { return s; }
            }
          }
        }
      }
      else  if ( nt3 < -rin*kRadTolerance*secRMin )
      {
        // Within radius of inner cone (real or imaginary)
        // -> Try 2nd root, with checking intersection is with real cone
        // -> If check fails, try 1st root, also checking intersection is
        //    on real cone

        b = nt2/nt1 ;
        c = nt3/nt1 ;
        d = b*b - c ;

        if ( d >= 0 )  // > 0
        {
          s  = -b + std::sqrt(d) ;
          zi = p.z() + s*v.z() ;
          ri = rMinAv + zi*tanRMin ;

          if ( ri > 0 )
          {
            if ( (s >= 0) && (std::fabs(zi) <= tolODz) )  // s > 0
            {
              if ( !fPhiFullCone )
              {
                xi     = p.x() + s*v.x() ;
                yi     = p.y() + s*v.y() ;
                cosPsi = (xi*cosCPhi + yi*sinCPhi)/ri ;

                if (cosPsi >= cosHDPhiOT)  { snxt = s; }
              }
              else  { return s; }
            }
          }
          else
          {
            s  = -b - std::sqrt(d) ;
            zi = p.z() + s*v.z() ;
            ri = rMinAv + zi*tanRMin ;

            if ( (s >= 0) && (ri > 0) && (std::fabs(zi) <= tolODz) ) // s>0
            {
              if ( !fPhiFullCone )
              {
                xi     = p.x() + s*v.x() ;
                yi     = p.y() + s*v.y() ;
                cosPsi = (xi*cosCPhi + yi*sinCPhi)/ri ;

                if (cosPsi >= cosHDPhiIT)  { snxt = s; }
              }
              else  { return s; }
            }
          }
        }
      }
      else
      {
        // Within kRadTol*0.5 of inner cone (real OR imaginary)
        // ----> Check not travelling through (=>0 to in)
        // ----> if not:
        //    -2nd root with validity check

        if ( std::fabs(p.z()) <= tolODz )
        {
          if ( nt2 > 0 )
          {
            // Inside inner real cone, heading outwards, inside z range

            if ( !fPhiFullCone )
            {
              cosPsi = (p.x()*cosCPhi + p.y()*sinCPhi)/std::sqrt(t3) ;

              if (cosPsi >= cosHDPhiIT)  { return 0.0; }
            }
            else  { return 0.0; }
          }
          else
          {
            // Within z extent, but not travelling through
            // -> 2nd root or kInfinity if 1st root on imaginary cone

            b = nt2/nt1 ;
            c = nt3/nt1 ;
            d = b*b - c ;

            if ( d >= 0 )   // > 0
            {
              s  = -b - std::sqrt(d) ;
              zi = p.z() + s*v.z() ;
              ri = rMinAv + zi*tanRMin ;

              if ( ri > 0 )   // 2nd root
              {
                s  = -b + std::sqrt(d) ;
                zi = p.z() + s*v.z() ;

                if ( (s >= 0) && (std::fabs(zi) <= tolODz) )  // s>0
                {
                  if ( !fPhiFullCone )
                  {
                    xi     = p.x() + s*v.x() ;
                    yi     = p.y() + s*v.y() ;
                    ri     = rMinAv + zi*tanRMin ;
                    cosPsi = (xi*cosCPhi + yi*sinCPhi)/ri ;

                    if ( cosPsi >= cosHDPhiIT )  { snxt = s; }
                  }
                  else  { return s; }
                }
              }
              else  { return kInfinity; }
            }
          }
        }
        else   // 2nd root
        {
          b = nt2/nt1 ;
          c = nt3/nt1 ;
          d = b*b - c ;

          if ( d > 0 )
          {  
            s  = -b + std::sqrt(d) ;
            zi = p.z() + s*v.z() ;

            if ( (s >= 0) && (std::fabs(zi) <= tolODz) )  // s>0
            {
              if ( !fPhiFullCone )
              {
                xi     = p.x() + s*v.x();
                yi     = p.y() + s*v.y();
                ri     = rMinAv + zi*tanRMin ;
                cosPsi = (xi*cosCPhi + yi*sinCPhi)/ri;

                if (cosPsi >= cosHDPhiIT)  { snxt = s; }
              }
              else  { return s; }
            }
          }
        }
      }
    }
  }

  // Phi segment intersection
  //
  // o Tolerant of points inside phi planes by up to kCarTolerance*0.5
  //
  // o NOTE: Large duplication of code between sphi & ephi checks
  //         -> only diffs: sphi -> ephi, Comp -> -Comp and half-plane
  //            intersection check <=0 -> >=0
  //         -> Should use some form of loop Construct

  if ( !fPhiFullCone )
  {
    // First phi surface (starting phi)

    Comp    = v.x()*sinSPhi - v.y()*cosSPhi ;
                    
    if ( Comp < 0 )    // Component in outwards normal dirn
    {
      Dist = (p.y()*cosSPhi - p.x()*sinSPhi) ;

      if (Dist < halfCarTolerance)
      {
        s = Dist/Comp ;

        if ( s < snxt )
        {
          if ( s < 0 )  { s = 0.0; }

          zi = p.z() + s*v.z() ;

          if ( std::fabs(zi) <= tolODz )
          {
            xi        = p.x() + s*v.x() ;
            yi        = p.y() + s*v.y() ;
            rhoi2     = xi*xi + yi*yi ;
            tolORMin2 = (rMinOAv + zi*tanRMin)*(rMinOAv + zi*tanRMin) ;
            tolORMax2 = (rMaxOAv + zi*tanRMax)*(rMaxOAv + zi*tanRMax) ;

            if ( (rhoi2 >= tolORMin2) && (rhoi2 <= tolORMax2) )
            {
              // z and r intersections good - check intersecting with
              // correct half-plane

              if ((yi*cosCPhi - xi*sinCPhi) <= 0 )  { snxt = s; }
            }
          }
        }
      }
    }

    // Second phi surface (Ending phi)

    Comp    = -(v.x()*sinEPhi - v.y()*cosEPhi) ;
        
    if ( Comp < 0 )   // Component in outwards normal dirn
    {
      Dist = -(p.y()*cosEPhi - p.x()*sinEPhi) ;
      if (Dist < halfCarTolerance)
      {
        s = Dist/Comp ;

        if ( s < snxt )
        {
          if ( s < 0 )  { s = 0.0; }

          zi = p.z() + s*v.z() ;

          if (std::fabs(zi) <= tolODz)
          {
            xi        = p.x() + s*v.x() ;
            yi        = p.y() + s*v.y() ;
            rhoi2     = xi*xi + yi*yi ;
            tolORMin2 = (rMinOAv + zi*tanRMin)*(rMinOAv + zi*tanRMin) ;
            tolORMax2 = (rMaxOAv + zi*tanRMax)*(rMaxOAv + zi*tanRMax) ;

            if ( (rhoi2 >= tolORMin2) && (rhoi2 <= tolORMax2) )
            {
              // z and r intersections good - check intersecting with
              // correct half-plane

              if ( (yi*cosCPhi - xi*sinCPhi) >= 0.0 )  { snxt = s; }
            }
          }
        }
      }
    }
  }
  if (snxt < halfCarTolerance)  { snxt = 0.; }

  return snxt ;
}

//////////////////////////////////////////////////////////////////////////////
// 
// Calculate distance (<= actual) to closest surface of shape from outside
// - Calculate distance to z, radial planes
// - Only to phi planes if outside phi extent
// - Return 0 if point inside

G4double G4Cons::DistanceToIn(const G4ThreeVector& p) const
{
  G4double safe=0.0, rho, safeR1, safeR2, safeZ, safePhi, cosPsi ;
  G4double tanRMin, secRMin, pRMin ;
  G4double tanRMax, secRMax, pRMax ;

  rho   = std::sqrt(p.x()*p.x() + p.y()*p.y()) ;
  safeZ = std::fabs(p.z()) - fDz ;

  if ( fRmin1 || fRmin2 )
  {
    tanRMin = (fRmin2 - fRmin1)*0.5/fDz ;
    secRMin = std::sqrt(1.0 + tanRMin*tanRMin) ;
    pRMin   = tanRMin*p.z() + (fRmin1 + fRmin2)*0.5 ;
    safeR1  = (pRMin - rho)/secRMin ;

    tanRMax = (fRmax2 - fRmax1)*0.5/fDz ;
    secRMax = std::sqrt(1.0 + tanRMax*tanRMax) ;
    pRMax   = tanRMax*p.z() + (fRmax1 + fRmax2)*0.5 ;
    safeR2  = (rho - pRMax)/secRMax ;

    if ( safeR1 > safeR2) { safe = safeR1; }
    else                  { safe = safeR2; }
  }
  else
  {
    tanRMax = (fRmax2 - fRmax1)*0.5/fDz ;
    secRMax = std::sqrt(1.0 + tanRMax*tanRMax) ;
    pRMax   = tanRMax*p.z() + (fRmax1 + fRmax2)*0.5 ;
    safe    = (rho - pRMax)/secRMax ;
  }
  if ( safeZ > safe )  { safe = safeZ; }

  if ( !fPhiFullCone && rho )
  {
    // Psi=angle from central phi to point

    cosPsi = (p.x()*cosCPhi + p.y()*sinCPhi)/rho ;

    if ( cosPsi < std::cos(fDPhi*0.5) ) // Point lies outside phi range
    {
      if ( (p.y()*cosCPhi - p.x()*sinCPhi) <= 0.0 )
      {
        safePhi = std::fabs(p.x()*std::sin(fSPhi)-p.y()*std::cos(fSPhi));
      }
      else
      {
        safePhi = std::fabs(p.x()*sinEPhi-p.y()*cosEPhi);
      }
      if ( safePhi > safe )  { safe = safePhi; }
    }
  }
  if ( safe < 0.0 )  { safe = 0.0; }

  return safe ;
}

///////////////////////////////////////////////////////////////
//
// Calculate distance to surface of shape from 'inside', allowing for tolerance
// - Only Calc rmax intersection if no valid rmin intersection

G4double G4Cons::DistanceToOut( const G4ThreeVector& p,
                                const G4ThreeVector& v,
                                const G4bool calcNorm,
                                      G4bool *validNorm,
                                      G4ThreeVector *n) const
{
  ESide side = kNull, sider = kNull, sidephi = kNull;

  static const G4double halfCarTolerance=kCarTolerance*0.5;
  static const G4double halfRadTolerance=kRadTolerance*0.5;
  static const G4double halfAngTolerance=kAngTolerance*0.5;

  G4double snxt,sr,sphi,pdist ;

  G4double tanRMax, secRMax, rMaxAv ;  // Data for outer cone
  G4double tanRMin, secRMin, rMinAv ;  // Data for inner cone

  G4double t1, t2, t3, rout, rin, nt1, nt2, nt3 ;
  G4double b, c, d, sr2, sr3 ;

  // Vars for intersection within tolerance

  ESide    sidetol ;
  G4double slentol = kInfinity ;

  // Vars for phi intersection:

  G4double pDistS, compS, pDistE, compE, sphi2, xi, yi, risec, vphi ;
  G4double zi, ri, deltaRoi2 ;

  // Z plane intersection

  if ( v.z() > 0.0 )
  {
    pdist = fDz - p.z() ;

    if (pdist > halfCarTolerance)
    {
      snxt = pdist/v.z() ;
      side = kPZ ;
    }
    else
    {
      if (calcNorm)
      {
        *n         = G4ThreeVector(0,0,1) ;
        *validNorm = true ;
      }
      return  snxt = 0.0;
    }
  }
  else if ( v.z() < 0.0 )
  {
    pdist = fDz + p.z() ;

    if ( pdist > halfCarTolerance)
    {
      snxt = -pdist/v.z() ;
      side = kMZ ;
    }
    else
    {
      if ( calcNorm )
      {
        *n         = G4ThreeVector(0,0,-1) ;
        *validNorm = true ;
      }
      return snxt = 0.0 ;
    }
  }
  else     // Travel perpendicular to z axis
  {
    snxt = kInfinity ;    
    side = kNull ;
  }

  // Radial Intersections
  //
  // Intersection with outer cone (possible return) and
  //                   inner cone (must also check phi)
  //
  // Intersection point (xi,yi,zi) on line x=p.x+t*v.x etc.
  //
  // Intersects with x^2+y^2=(a*z+b)^2
  //
  // where a=tanRMax or tanRMin
  //       b=rMaxAv  or rMinAv
  //
  // (vx^2+vy^2-(a*vz)^2)t^2+2t(pxvx+pyvy-a*vz(a*pz+b))+px^2+py^2-(a*pz+b)^2=0 ;
  //     t1                        t2                      t3  
  //
  //  \--------u-------/       \-----------v----------/ \---------w--------/

  tanRMax = (fRmax2 - fRmax1)*0.5/fDz ;
  secRMax = std::sqrt(1.0 + tanRMax*tanRMax) ;
  rMaxAv  = (fRmax1 + fRmax2)*0.5 ;


  t1   = 1.0 - v.z()*v.z() ;      // since v normalised
  t2   = p.x()*v.x() + p.y()*v.y() ;
  t3   = p.x()*p.x() + p.y()*p.y() ;
  rout = tanRMax*p.z() + rMaxAv ;

  nt1 = t1 - (tanRMax*v.z())*(tanRMax*v.z()) ;
  nt2 = t2 - tanRMax*v.z()*rout ;
  nt3 = t3 - rout*rout ;

  if (v.z() > 0.0)
  {
    deltaRoi2 = snxt*snxt*t1 + 2*snxt*t2 + t3
                - fRmax2*(fRmax2 + kRadTolerance*secRMax);
  }
  else if ( v.z() < 0.0 )
  {
    deltaRoi2 = snxt*snxt*t1 + 2*snxt*t2 + t3
                - fRmax1*(fRmax1 + kRadTolerance*secRMax);
  }
  else
  {
    deltaRoi2 = 1.0;
  }

  if ( nt1 && (deltaRoi2 > 0.0) )  
  {
    // Equation quadratic => 2 roots : second root must be leaving

    b = nt2/nt1 ;
    c = nt3/nt1 ;
    d = b*b - c ;

    if ( d >= 0 )
    {
      // Check if on outer cone & heading outwards
      // NOTE: Should use rho-rout>-kRadTolerance*0.5
        
      if (nt3 > -halfRadTolerance && nt2 >= 0 )
      {
        if (calcNorm)
        {
          risec      = std::sqrt(t3)*secRMax ;
          *validNorm = true ;
          *n         = G4ThreeVector(p.x()/risec,p.y()/risec,-tanRMax/secRMax);
        }
        return snxt=0 ;
      }
      else
      {
        sider = kRMax  ;
        sr    = -b - std::sqrt(d) ; // was +srqrt(d), vmg 28.04.99
        zi    = p.z() + sr*v.z() ;
        ri    = tanRMax*zi + rMaxAv ;
          
        if ((ri >= 0) && (-halfRadTolerance <= sr) && (sr <= halfRadTolerance))
        {
          // An intersection within the tolerance
          //   we will Store it in case it is good -
          // 
          slentol = sr ;
          sidetol = kRMax ;
        }            
        if ( (ri < 0) || (sr < halfRadTolerance) )
        {
          // Safety: if both roots -ve ensure that sr cannot `win'
          //         distance to out

          sr2 = -b + std::sqrt(d) ;
          zi  = p.z() + sr2*v.z() ;
          ri  = tanRMax*zi + rMaxAv ;

          if ((ri >= 0) && (sr2 > halfRadTolerance))
          {
            sr = sr2;
          }
          else
          {
            sr = kInfinity ;

            if( (-halfRadTolerance <= sr2) && ( sr2 <= halfRadTolerance) )
            {
              // An intersection within the tolerance.
              // Storing it in case it is good.

              slentol = sr2 ;
              sidetol = kRMax ;
            }
          }
        }
      }
    }
    else
    {
      // No intersection with outer cone & not parallel
      // -> already outside, no intersection

      if ( calcNorm )
      {
        risec      = std::sqrt(t3)*secRMax;
        *validNorm = true;
        *n         = G4ThreeVector(p.x()/risec,p.y()/risec,-tanRMax/secRMax);
      }
      return snxt = 0.0 ;
    }
  }
  else if ( nt2 && (deltaRoi2 > 0.0) )
  {
    // Linear case (only one intersection) => point outside outer cone

    if ( calcNorm )
    {
      risec      = std::sqrt(t3)*secRMax;
      *validNorm = true;
      *n         = G4ThreeVector(p.x()/risec,p.y()/risec,-tanRMax/secRMax);
    }
    return snxt = 0.0 ;
  }
  else
  {
    // No intersection -> parallel to outer cone
    // => Z or inner cone intersection

    sr = kInfinity ;
  }

  // Check possible intersection within tolerance

  if ( slentol <= halfCarTolerance )
  {
    // An intersection within the tolerance was found.  
    // We must accept it only if the momentum points outwards.  
    //
    // G4ThreeVector ptTol ;  // The point of the intersection  
    // ptTol= p + slentol*v ;
    // ri=tanRMax*zi+rMaxAv ;
    //
    // Calculate a normal vector,  as below

    xi    = p.x() + slentol*v.x();
    yi    = p.y() + slentol*v.y();
    risec = std::sqrt(xi*xi + yi*yi)*secRMax;
    G4ThreeVector Normal = G4ThreeVector(xi/risec,yi/risec,-tanRMax/secRMax);

    if ( Normal.dot(v) > 0 )    // We will leave the Cone immediatelly
    {
      if ( calcNorm ) 
      {
        *n         = Normal.unit() ;
        *validNorm = true ;
      }
      return snxt = 0.0 ;
    }
    else // On the surface, but not heading out so we ignore this intersection
    {    //                                        (as it is within tolerance).
      slentol = kInfinity ;
    }
  }

  // Inner Cone intersection

  if ( fRmin1 || fRmin2 )
  {
    tanRMin = (fRmin2 - fRmin1)*0.5/fDz ;
    nt1     = t1 - (tanRMin*v.z())*(tanRMin*v.z()) ;

    if ( nt1 )
    {
      secRMin = std::sqrt(1.0 + tanRMin*tanRMin) ;
      rMinAv  = (fRmin1 + fRmin2)*0.5 ;    
      rin     = tanRMin*p.z() + rMinAv ;
      nt2     = t2 - tanRMin*v.z()*rin ;
      nt3     = t3 - rin*rin ;
      
      // Equation quadratic => 2 roots : first root must be leaving

      b = nt2/nt1 ;
      c = nt3/nt1 ;
      d = b*b - c ;

      if ( d >= 0.0 )
      {
        // NOTE: should be rho-rin<kRadTolerance*0.5,
        //       but using squared versions for efficiency

        if (nt3 < kRadTolerance*(rin + kRadTolerance*0.25)) 
        {
          if ( nt2 < 0.0 )
          {
            if (calcNorm)  { *validNorm = false; }
            return          snxt      = 0.0;
          }
        }
        else
        {
          sr2 = -b - std::sqrt(d) ;
          zi  = p.z() + sr2*v.z() ;
          ri  = tanRMin*zi + rMinAv ;

          if( (ri>=0.0)&&(-halfRadTolerance<=sr2)&&(sr2<=halfRadTolerance) )
          {
            // An intersection within the tolerance
            // storing it in case it is good.

            slentol = sr2 ;
            sidetol = kRMax ;
          }
          if( (ri<0) || (sr2 < halfRadTolerance) )
          {
            sr3 = -b + std::sqrt(d) ;

            // Safety: if both roots -ve ensure that sr cannot `win'
            //         distancetoout

            if  ( sr3 > halfRadTolerance )
            {
              if( sr3 < sr )
              {
                zi = p.z() + sr3*v.z() ;
                ri = tanRMin*zi + rMinAv ;

                if ( ri >= 0.0 )
                {
                  sr=sr3 ;
                  sider=kRMin ;
                }
              } 
            }
            else if ( sr3 > -halfRadTolerance )
            {
              // Intersection in tolerance. Store to check if it's good

              slentol = sr3 ;
              sidetol = kRMin ;
            }
          }
          else if ( (sr2 < sr) && (sr2 > halfCarTolerance) )
          {
            sr    = sr2 ;
            sider = kRMin ;
          }
          else if (sr2 > -halfCarTolerance)
          {
            // Intersection in tolerance. Store to check if it's good

            slentol = sr2 ;
            sidetol = kRMin ;
          }    
          if( slentol <= halfCarTolerance  )
          {
            // An intersection within the tolerance was found. 
            // We must accept it only if  the momentum points outwards. 

            G4ThreeVector Normal ; 
            
            // Calculate a normal vector,  as below

            xi     = p.x() + slentol*v.x() ;
            yi     = p.y() + slentol*v.y() ;
            risec  = std::sqrt(xi*xi + yi*yi)*secRMin ;
            Normal = G4ThreeVector(xi/risec,yi/risec,-tanRMin/secRMin) ;
            
            if( Normal.dot(v) > 0 )
            {
              // We will leave the cone immediately

              if( calcNorm ) 
              {
                *n         = Normal.unit() ;
                *validNorm = true ;
              }
              return snxt = 0.0 ;
            }
            else 
            { 
              // On the surface, but not heading out so we ignore this
              // intersection (as it is within tolerance). 

              slentol = kInfinity ;
            }        
          }
        }
      }
    }
  }

  // Linear case => point outside inner cone ---> outer cone intersect
  //
  // Phi Intersection
  
  if ( !fPhiFullCone )
  {
    // add angle calculation with correction 
    // of the difference in domain of atan2 and Sphi

    vphi = std::atan2(v.y(),v.x()) ;

    if ( vphi < fSPhi - halfAngTolerance  )              { vphi += twopi; }
    else if ( vphi > fSPhi + fDPhi + halfAngTolerance )  { vphi -= twopi; }

    if ( p.x() || p.y() )   // Check if on z axis (rho not needed later)
    {
      // pDist -ve when inside

      pDistS = p.x()*sinSPhi - p.y()*cosSPhi ;
      pDistE = -p.x()*sinEPhi + p.y()*cosEPhi ;

      // Comp -ve when in direction of outwards normal

      compS = -sinSPhi*v.x() + cosSPhi*v.y() ;
      compE = sinEPhi*v.x() - cosEPhi*v.y() ;

      sidephi = kNull ;

      if( ( (fDPhi <= pi) && ( (pDistS <= halfCarTolerance)
                            && (pDistE <= halfCarTolerance) ) )
         || ( (fDPhi >  pi) && !((pDistS >  halfCarTolerance)
                              && (pDistE >  halfCarTolerance) ) )  )
      {
        // Inside both phi *full* planes
        if ( compS < 0 )
        {
          sphi = pDistS/compS ;
          if (sphi >= -halfCarTolerance)
          {
            xi = p.x() + sphi*v.x() ;
            yi = p.y() + sphi*v.y() ;

            // Check intersecting with correct half-plane
            // (if not -> no intersect)
            //
            if ( (std::abs(xi)<=kCarTolerance)
              && (std::abs(yi)<=kCarTolerance) )
            {
              sidephi= kSPhi;
              if ( ( fSPhi-halfAngTolerance <= vphi )
                && ( fSPhi+fDPhi+halfAngTolerance >=vphi ) )
              {
                sphi = kInfinity;
              }
            }
            else
            if ( (yi*cosCPhi-xi*sinCPhi)>=0 )
            {
              sphi = kInfinity ;
            }
            else
            {
              sidephi = kSPhi ;
              if ( pDistS > -halfCarTolerance )
              {
                sphi = 0.0 ; // Leave by sphi immediately
              }    
            }       
          }
          else
          {
            sphi = kInfinity ;
          }
        }
        else
        {
          sphi = kInfinity ;
        }

        if ( compE < 0 )
        {
          sphi2 = pDistE/compE ;

          // Only check further if < starting phi intersection
          //
          if ( (sphi2 > -halfCarTolerance) && (sphi2 < sphi) )
          {
            xi = p.x() + sphi2*v.x() ;
            yi = p.y() + sphi2*v.y() ;

            // Check intersecting with correct half-plane

            if ( (std::abs(xi)<=kCarTolerance)
              && (std::abs(yi)<=kCarTolerance) )
            {
              // Leaving via ending phi

              if(!( (fSPhi-halfAngTolerance <= vphi)
                 && (fSPhi+fDPhi+halfAngTolerance >= vphi) ) )
              {
                sidephi = kEPhi ;
                if ( pDistE <= -halfCarTolerance )  { sphi = sphi2; }
                else                                { sphi = 0.0; }
              }
            }
            else // Check intersecting with correct half-plane
            if ( yi*cosCPhi-xi*sinCPhi >= 0 )
            {
              // Leaving via ending phi

              sidephi = kEPhi ;
              if ( pDistE <= -halfCarTolerance )  { sphi = sphi2; }
              else                                { sphi = 0.0; }
            }
          }
        }
      }
      else
      {
        sphi = kInfinity ;
      }
    }
    else
    {
      // On z axis + travel not || to z axis -> if phi of vector direction
      // within phi of shape, Step limited by rmax, else Step =0

      if ( (fSPhi-halfAngTolerance <= vphi)
        && (vphi <= fSPhi+fDPhi+halfAngTolerance) )
      {
        sphi = kInfinity ;
      }
      else
      {
        sidephi = kSPhi  ;   // arbitrary 
        sphi    = 0.0 ;
      }
    }      
    if ( sphi < snxt )  // Order intersecttions
    {
      snxt=sphi ;
      side=sidephi ;
    }
  }
  if ( sr < snxt )  // Order intersections
  {
    snxt = sr    ;
    side = sider ;
  }
  if (calcNorm)
  {
    switch(side)
    {                     // Note: returned vector not normalised
      case kRMax:         // (divide by frmax for unit vector)
        xi         = p.x() + snxt*v.x() ;
        yi         = p.y() + snxt*v.y() ;
        risec      = std::sqrt(xi*xi + yi*yi)*secRMax ;
        *n         = G4ThreeVector(xi/risec,yi/risec,-tanRMax/secRMax) ;
        *validNorm = true ;
        break ;
      case kRMin:
        *validNorm = false ;  // Rmin is inconvex
        break ;
      case kSPhi:
        if ( fDPhi <= pi )
        {
          *n         = G4ThreeVector(sinSPhi, -cosSPhi, 0);
          *validNorm = true ;
        }
        else
        {
          *validNorm = false ;
        }
        break ;
      case kEPhi:
        if ( fDPhi <= pi )
        {
          *n = G4ThreeVector(-sinEPhi, cosEPhi, 0);
          *validNorm = true ;
        }
        else
        {
          *validNorm = false ;
        }
        break ;
      case kPZ:
        *n         = G4ThreeVector(0,0,1) ;
        *validNorm = true ;
        break ;
      case kMZ:
        *n         = G4ThreeVector(0,0,-1) ;
        *validNorm = true ;
        break ;
      default:
        G4cout.precision(16) ;
        G4cout << G4endl ;
        DumpInfo();
        G4cout << "Position:"  << G4endl << G4endl ;
        G4cout << "p.x() = "   << p.x()/mm << " mm" << G4endl ;
        G4cout << "p.y() = "   << p.y()/mm << " mm" << G4endl ;
        G4cout << "p.z() = "   << p.z()/mm << " mm" << G4endl << G4endl ;
        G4cout << "pho at z = "   << std::sqrt( p.x()*p.x()+p.y()*p.y() )/mm
               << " mm" << G4endl << G4endl ;
        if( p.x() != 0. || p.x() != 0.)
        {
           G4cout << "point phi = "   << std::atan2(p.y(),p.x())/degree
                  << " degree" << G4endl << G4endl ; 
        }
        G4cout << "Direction:" << G4endl << G4endl ;
        G4cout << "v.x() = "   << v.x() << G4endl ;
        G4cout << "v.y() = "   << v.y() << G4endl ;
        G4cout << "v.z() = "   << v.z() << G4endl<< G4endl ;
        G4cout << "Proposed distance :" << G4endl<< G4endl ;
        G4cout << "snxt = "    << snxt/mm << " mm" << G4endl << G4endl ;
        G4Exception("G4Cons::DistanceToOut(p,v,..)","Notification",JustWarning,
                    "Undefined side for valid surface normal to solid.") ;
        break ;
    }
  }
  if (snxt < halfCarTolerance)  { snxt = 0.; }

  return snxt ;
}

//////////////////////////////////////////////////////////////////
//
// Calculate distance (<=actual) to closest surface of shape from inside

G4double G4Cons::DistanceToOut(const G4ThreeVector& p) const
{
  G4double safe=0.0, rho, safeR1, safeR2, safeZ, safePhi;
  G4double tanRMin, secRMin, pRMin;
  G4double tanRMax, secRMax, pRMax;

#ifdef G4CSGDEBUG
  if( Inside(p) == kOutside )
  {
    G4cout.precision(16) ;
    G4cout << G4endl ;
    DumpInfo();
    G4cout << "Position:"  << G4endl << G4endl ;
    G4cout << "p.x() = "   << p.x()/mm << " mm" << G4endl ;
    G4cout << "p.y() = "   << p.y()/mm << " mm" << G4endl ;
    G4cout << "p.z() = "   << p.z()/mm << " mm" << G4endl << G4endl ;
    G4cout << "pho at z = "   << std::sqrt( p.x()*p.x()+p.y()*p.y() )/mm
           << " mm" << G4endl << G4endl ;
    if( (p.x() != 0.) || (p.x() != 0.) )
    {
      G4cout << "point phi = "   << std::atan2(p.y(),p.x())/degree
             << " degree" << G4endl << G4endl ; 
    }
    G4Exception("G4Cons::DistanceToOut(p)", "Notification",
                JustWarning, "Point p is outside !?" );
  }
#endif

  rho = std::sqrt(p.x()*p.x() + p.y()*p.y()) ;
  safeZ = fDz - std::fabs(p.z()) ;

  if (fRmin1 || fRmin2)
  {
    tanRMin = (fRmin2 - fRmin1)*0.5/fDz ;
    secRMin = std::sqrt(1.0 + tanRMin*tanRMin) ;
    pRMin   = tanRMin*p.z() + (fRmin1 + fRmin2)*0.5 ;
    safeR1  = (rho - pRMin)/secRMin ;
  }
  else
  {
    safeR1 = kInfinity ;
  }

  tanRMax = (fRmax2 - fRmax1)*0.5/fDz ;
  secRMax = std::sqrt(1.0 + tanRMax*tanRMax) ;
  pRMax   = tanRMax*p.z() + (fRmax1+fRmax2)*0.5 ;
  safeR2  = (pRMax - rho)/secRMax ;

  if (safeR1 < safeR2)  { safe = safeR1; }
  else                  { safe = safeR2; }
  if (safeZ < safe)     { safe = safeZ ; }

  // Check if phi divided, Calc distances closest phi plane

  if (!fPhiFullCone)
  {
    // Above/below central phi of G4Cons?

    if ( (p.y()*cosCPhi - p.x()*sinCPhi) <= 0 )
    {
      safePhi = -(p.x()*sinSPhi - p.y()*cosSPhi) ;
    }
    else
    {
      safePhi = (p.x()*sinEPhi - p.y()*cosEPhi) ;
    }
    if (safePhi < safe)  { safe = safePhi; }
  }
  if ( safe < 0 )  { safe = 0; }

  return safe ;
}

////////////////////////////////////////////////////////////////////////////
//
// Create a List containing the transformed vertices
// Ordering [0-3] -fDz cross section
//          [4-7] +fDz cross section such that [0] is below [4],
//                                             [1] below [5] etc.
// Note:
//  Caller has deletion resposibility
//  Potential improvement: For last slice, use actual ending angle
//                         to avoid rounding error problems.

G4ThreeVectorList*
G4Cons::CreateRotatedVertices(const G4AffineTransform& pTransform) const
{
  G4ThreeVectorList* vertices ;
  G4ThreeVector vertex0, vertex1, vertex2, vertex3 ;
  G4double meshAngle, meshRMax1, meshRMax2, crossAngle;
  G4double cosCrossAngle, sinCrossAngle, sAngle ;
  G4double rMaxX1, rMaxX2, rMaxY1, rMaxY2, rMinX1, rMinX2, rMinY1, rMinY2 ;
  G4int crossSection, noCrossSections ;

  // Compute no of cross-sections necessary to mesh cone
    
  noCrossSections = G4int(fDPhi/kMeshAngleDefault) + 1 ;

  if (noCrossSections < kMinMeshSections)
  {
    noCrossSections = kMinMeshSections ;
  }
  else if (noCrossSections > kMaxMeshSections)
  {
    noCrossSections = kMaxMeshSections ;
  }
  meshAngle = fDPhi/(noCrossSections - 1) ;

  meshRMax1 = fRmax1/std::cos(meshAngle*0.5) ;
  meshRMax2 = fRmax2/std::cos(meshAngle*0.5) ;

  // If complete in phi, set start angle such that mesh will be at RMax
  // on the x axis. Will give better extent calculations when not rotated.

  if ( fPhiFullCone && (fSPhi == 0.0) )
  {
    sAngle = -meshAngle*0.5 ;
  }
  else
  {
    sAngle = fSPhi ;
  } 
  vertices = new G4ThreeVectorList();
  vertices->reserve(noCrossSections*4) ;

  if (vertices)
  {
    for (crossSection = 0 ; crossSection < noCrossSections ; crossSection++)
    {
      // Compute coordinates of cross section at section crossSection

      crossAngle    = sAngle + crossSection*meshAngle ;
      cosCrossAngle = std::cos(crossAngle) ;
      sinCrossAngle = std::sin(crossAngle) ;

      rMaxX1 = meshRMax1*cosCrossAngle ;
      rMaxY1 = meshRMax1*sinCrossAngle ;
      rMaxX2 = meshRMax2*cosCrossAngle ;
      rMaxY2 = meshRMax2*sinCrossAngle ;
        
      rMinX1 = fRmin1*cosCrossAngle ;
      rMinY1 = fRmin1*sinCrossAngle ;
      rMinX2 = fRmin2*cosCrossAngle ;
      rMinY2 = fRmin2*sinCrossAngle ;
        
      vertex0 = G4ThreeVector(rMinX1,rMinY1,-fDz) ;
      vertex1 = G4ThreeVector(rMaxX1,rMaxY1,-fDz) ;
      vertex2 = G4ThreeVector(rMaxX2,rMaxY2,+fDz) ;
      vertex3 = G4ThreeVector(rMinX2,rMinY2,+fDz) ;

      vertices->push_back(pTransform.TransformPoint(vertex0)) ;
      vertices->push_back(pTransform.TransformPoint(vertex1)) ;
      vertices->push_back(pTransform.TransformPoint(vertex2)) ;
      vertices->push_back(pTransform.TransformPoint(vertex3)) ;
    }
  }
  else
  {
    DumpInfo();
    G4Exception("G4Cons::CreateRotatedVertices()",
                "FatalError", FatalException,
                "Error in allocation of vertices. Out of memory !");
  }

  return vertices ;
}

//////////////////////////////////////////////////////////////////////////
//
// GetEntityType

G4GeometryType G4Cons::GetEntityType() const
{
  return G4String("G4Cons");
}

//////////////////////////////////////////////////////////////////////////
//
// Stream object contents to an output stream

std::ostream& G4Cons::StreamInfo(std::ostream& os) const
{
  os << "-----------------------------------------------------------\n"
     << "    *** Dump for solid - " << GetName() << " ***\n"
     << "    ===================================================\n"
     << " Solid type: G4Cons\n"
     << " Parameters: \n"
     << "   inside  -fDz radius: "  << fRmin1/mm << " mm \n"
     << "   outside -fDz radius: "  << fRmax1/mm << " mm \n"
     << "   inside  +fDz radius: "  << fRmin2/mm << " mm \n"
     << "   outside +fDz radius: "  << fRmax2/mm << " mm \n"
     << "   half length in Z   : "  << fDz/mm << " mm \n"
     << "   starting angle of segment: " << fSPhi/degree << " degrees \n"
     << "   delta angle of segment   : " << fDPhi/degree << " degrees \n"
     << "-----------------------------------------------------------\n";

  return os;
}



/////////////////////////////////////////////////////////////////////////
//
// GetPointOnSurface

G4ThreeVector G4Cons::GetPointOnSurface() const
{   
  // declare working variables
  //
  G4double Aone, Atwo, Athree, Afour, Afive, slin, slout, phi;
  G4double zRand, cosu, sinu, rRand1, rRand2, chose, rone, rtwo, qone, qtwo;
  rone = (fRmax1-fRmax2)/(2.*fDz);
  rtwo = (fRmin1-fRmin2)/(2.*fDz);
  qone=0.; qtwo=0.;
  if(fRmax1!=fRmax2) { qone = fDz*(fRmax1+fRmax2)/(fRmax1-fRmax2); }
  if(fRmin1!=fRmin2) { qtwo = fDz*(fRmin1+fRmin2)/(fRmin1-fRmin2); }
  slin   = std::sqrt(sqr(fRmin1-fRmin2)+sqr(2.*fDz));
  slout  = std::sqrt(sqr(fRmax1-fRmax2)+sqr(2.*fDz));
  Aone   = 0.5*fDPhi*(fRmax2 + fRmax1)*slout;       
  Atwo   = 0.5*fDPhi*(fRmin2 + fRmin1)*slin;
  Athree = 0.5*fDPhi*(fRmax1*fRmax1-fRmin1*fRmin1); 
  Afour  = 0.5*fDPhi*(fRmax2*fRmax2-fRmin2*fRmin2);
  Afive  = fDz*(fRmax1-fRmin1+fRmax2-fRmin2);
  
  phi    = RandFlat::shoot(fSPhi,fSPhi+fDPhi);
  cosu   = std::cos(phi);  sinu = std::sin(phi);
  rRand1 = RandFlat::shoot(fRmin1,fRmax1);
  rRand2 = RandFlat::shoot(fRmin2,fRmax2);
  
  if ( (fSPhi == 0.) && fPhiFullCone )  { Afive = 0.; }
  chose  = RandFlat::shoot(0.,Aone+Atwo+Athree+Afour+2.*Afive);
 
  if( (chose >= 0.) && (chose < Aone) )
  {
    if(fRmin1 != fRmin2)
    {
      zRand = RandFlat::shoot(-1.*fDz,fDz); 
      return G4ThreeVector (rtwo*cosu*(qtwo-zRand),
                            rtwo*sinu*(qtwo-zRand), zRand);
    }
    else
    {
      return G4ThreeVector(fRmin1*cosu, fRmin2*sinu,
                           RandFlat::shoot(-1.*fDz,fDz));
    }
  }
  else if( (chose >= Aone) && (chose <= Aone + Atwo) )
  {
    if(fRmax1 != fRmax2)
    {
      zRand = RandFlat::shoot(-1.*fDz,fDz); 
      return G4ThreeVector (rone*cosu*(qone-zRand),
                            rone*sinu*(qone-zRand), zRand);
    }    
    else
    {
      return G4ThreeVector(fRmax1*cosu, fRmax2*sinu,
                           RandFlat::shoot(-1.*fDz,fDz));
    }
  }
  else if( (chose >= Aone + Atwo) && (chose < Aone + Atwo + Athree) )
  {
    return G4ThreeVector (rRand1*cosu, rRand1*sinu, -1*fDz);
  }
  else if( (chose >= Aone + Atwo + Athree)
        && (chose < Aone + Atwo + Athree + Afour) )
  {
    return G4ThreeVector (rRand2*cosu,rRand2*sinu,fDz);
  }
  else if( (chose >= Aone + Atwo + Athree + Afour)
        && (chose < Aone + Atwo + Athree + Afour + Afive) )
  {
    zRand  = RandFlat::shoot(-1.*fDz,fDz);
    rRand1 = RandFlat::shoot(fRmin2-((zRand-fDz)/(2.*fDz))*(fRmin1-fRmin2),
                             fRmax2-((zRand-fDz)/(2.*fDz))*(fRmax1-fRmax2)); 
    return G4ThreeVector (rRand1*std::cos(fSPhi),
                          rRand1*std::sin(fSPhi), zRand);
  }
  else
  { 
    zRand  = RandFlat::shoot(-1.*fDz,fDz);
    rRand1 = RandFlat::shoot(fRmin2-((zRand-fDz)/(2.*fDz))*(fRmin1-fRmin2),
                             fRmax2-((zRand-fDz)/(2.*fDz))*(fRmax1-fRmax2)); 
    return G4ThreeVector (rRand1*std::cos(fSPhi+fDPhi),
                          rRand1*std::sin(fSPhi+fDPhi), zRand);
  }
}

//////////////////////////////////////////////////////////////////////////
//
// Methods for visualisation

void G4Cons::DescribeYourselfTo (G4VGraphicsScene& scene) const
{
  scene.AddSolid (*this);
}

G4Polyhedron* G4Cons::CreatePolyhedron () const
{
  return new G4PolyhedronCons(fRmin1,fRmax1,fRmin2,fRmax2,fDz,fSPhi,fDPhi);
}

G4NURBS* G4Cons::CreateNURBS () const
{
  G4double RMax = (fRmax2 >= fRmax1) ? fRmax2 : fRmax1 ;
  return new G4NURBSbox (RMax, RMax, fDz);       // Box for now!!!
}