source: trunk/source/geometry/solids/test/OpticalEscape/src/AXPETDetectorConstruction.cc@ 1350

Last change on this file since 1350 was 1347, checked in by garnier, 15 years ago

geant4 tag 9.4
File size: 26.0 KB
Line 
1//
2// ********************************************************************
3// * License and Disclaimer *
4// * *
5// * The Geant4 software is copyright of the Copyright Holders of *
6// * the Geant4 Collaboration. It is provided under the terms and *
7// * conditions of the Geant4 Software License, included in the file *
8// * LICENSE and available at http://cern.ch/geant4/license . These *
9// * include a list of copyright holders. *
10// * *
11// * Neither the authors of this software system, nor their employing *
12// * institutes,nor the agencies providing financial support for this *
13// * work make any representation or warranty, express or implied, *
14// * regarding this software system or assume any liability for its *
15// * use. Please see the license in the file LICENSE and URL above *
16// * for the full disclaimer and the limitation of liability. *
17// * *
18// * This code implementation is the result of the scientific and *
19// * technical work of the GEANT4 collaboration. *
20// * By using, copying, modifying or distributing the software (or *
21// * any work based on the software) you agree to acknowledge its *
22// * use in resulting scientific publications, and indicate your *
23// * acceptance of all terms of the Geant4 Software license. *
24// ********************************************************************
25//
26// $Id: AXPETDetectorConstruction.cc,v 1.2 2010/11/16 13:35:53 tnikitin Exp $
27// ------------------------------------------------------------
28// Geant4 class implementation file
29//
30// 03/09/2008, by T.Nikitina
31// ------------------------------------------------------------
32
33#include "AXPETDetectorConstruction.hh"
34#include "AXPETDetectorMessenger.hh"
35
36//Solids
37#include "G4Box.hh"
38#include "G4Tubs.hh"
39#include "G4Sphere.hh"
40#include "G4Orb.hh"
41#include "G4Cons.hh"
42#include "G4Hype.hh"
43#include "G4Para.hh"
44#include "G4Paraboloid.hh"
45#include "G4Torus.hh"
46#include "G4Trd.hh"
47#include "G4Ellipsoid.hh"
48#include "G4EllipticalTube.hh"
49#include "G4EllipticalCone.hh"
50
51#include "G4Trap.hh"
52#include "G4Trd.hh"
53#include "G4Tet.hh"
54#include "G4GenericTrap.hh"
55#include "G4TessellatedSolid.hh"
56#include "G4ExtrudedSolid.hh"
57
58#include "G4Polycone.hh"
59#include "G4Polyhedra.hh"
60
61#include "G4TwistedTubs.hh"
62#include "G4TwistedBox.hh"
63#include "G4TwistedTrd.hh"
64#include "G4TwistedTrap.hh"
65
66#include "G4TwoVector.hh"
67#include "G4TriangularFacet.hh"
68#include "G4QuadrangularFacet.hh"
69
70#include "G4BooleanSolid.hh"
71#include "G4DisplacedSolid.hh"
72#include "G4UnionSolid.hh"
73#include "G4IntersectionSolid.hh"
74#include "G4SubtractionSolid.hh"
75#include "G4ReflectedSolid.hh"
76#include "G4RotationMatrix.hh"
77#include "G4BREPSolidBox.hh"
78//
79#include "G4LogicalVolume.hh"
80#include "G4PVPlacement.hh"
81#include "G4PVReplica.hh"
82#include "G4ThreeVector.hh"
83#include "G4RotationMatrix.hh"
84
85#include "G4RunManager.hh"
86#include "G4GeometryManager.hh"
87#include "G4PhysicalVolumeStore.hh"
88#include "G4LogicalVolumeStore.hh"
89#include "G4SolidStore.hh"
90
91#include "G4MaterialPropertiesTable.hh"
92#include "G4OpticalSurface.hh"
93#include "G4LogicalSkinSurface.hh"
94#include "G4LogicalBorderSurface.hh"
95#include "AXPETMaterial.hh"
96
97#include "G4VisAttributes.hh"
98#include "G4Colour.hh"
99
100#include "globals.hh"
101
102AXPETDetectorConstruction::AXPETDetectorConstruction():
103WorldVolume(0),LogWorldVolume(0),PhysWorldVolume(0),
104 LYSOVolume(0),LogLYSOVolume(0), PhysLYSOVolume(0)//,
105 //InterVolume(0),LogInterVolume(0), PhysInterVolume(0),
106 //DetecVolume(0),LogDetecVolume(0), PhysDetecVolume(0)
107{
108 pttoMaterial = new AXPETMaterial();
109
110 worldXsize = 20. *cm;
111 worldYsize = 20. *cm;
112 worldZsize = 20. *cm;
113
114 lysoIz = 2.0 *mm;
115 lysoDz = 0.1 *mm;
116 lysoR = 6.0 *mm;
117
118 detectorMessenger = new AXPETDetectorMessenger(this);
119 fval="Tubs";
120
121 xRot=0.0;
122 yRot=0.0;
123 zRot=0.0;
124 fAbort=0;
125}
126
127AXPETDetectorConstruction::~AXPETDetectorConstruction()
128{ delete detectorMessenger; }
129
130
131
132void AXPETDetectorConstruction::SwitchDetector()
133{
134
135 G4RunManager::GetRunManager()->DefineWorldVolume(PhysWorldVolume);
136
137}
138G4VSolid*
139AXPETDetectorConstruction::SelectDetector( const G4String& val )
140{
141
142 G4Box* b1 = new G4Box ( "b1", 1*mm, 0.5*mm, 0.50*mm );
143 G4Box* b2 = new G4Box ( "b2", 0.5*mm, 1*mm, 0.5*mm );
144
145 fval = val ;
146 G4double fTrackerR1,fTrackerR2,fPhi,fPhiSegment,fTheta,fThetaSegment ;
147 G4double fSemiAxisX,fSemiAxisY,fSemiAxisZ ;
148 G4double fTrackerR,fTrackerpDx1,fTrackerpDy1,fTrackerpDz;
149 if (val == "Sphere")
150 {
151 // only solid sphere is supportet for now
152 fTrackerR1 = 0*mm ;
153 fTrackerR2 = (lysoR-0.01*mm)/2. ;
154 fPhi = 0*deg ;
155 fPhiSegment = 360*deg ;
156 fTheta = 0*deg ;
157 fThetaSegment = 180*deg ;
158 aVolume = new G4Sphere ("aSphere", fTrackerR1, fTrackerR2 ,fPhi, fPhiSegment, fTheta, fThetaSegment);
159 }
160
161 else if (val == "HalfSphere")
162 {
163 // only solid sphere is supportet for now
164 fTrackerR1 = 0. ;
165 fTrackerR2 = (lysoR-0.01*mm)/2. ;
166 fPhi = 0*deg ;
167 fPhiSegment = 180*deg ;
168 fTheta = 0*deg ;
169 fThetaSegment = 180*deg ;
170 aVolume = new G4Sphere ("aHalfSphere", fTrackerR1, fTrackerR2 ,fPhi, fPhiSegment, fTheta, fThetaSegment);
171
172 }
173 else if (val == "HollowSphere")
174 {
175 // only solid sphere is supportet for now
176 fTrackerR1 = (lysoR-0.01*mm)/4.;
177 fTrackerR2 = (lysoR-0.01*mm)/2. ;
178 fPhi = 0*deg ;
179 fPhiSegment = 360*deg ;
180 fTheta = 0*deg ;
181 fThetaSegment = 180*deg ;
182 aVolume = new G4Sphere ("aHollowSphere", fTrackerR1, fTrackerR2 ,fPhi, fPhiSegment, fTheta, fThetaSegment);
183
184 }
185 else if (val == "HalfHollowSphere")
186 {
187 // only solid sphere is supportet for now
188 fTrackerR1 =(lysoR-0.01*mm)/4. ;
189 fTrackerR2 =(lysoR-0.01*mm)/2. ;
190 fPhi = 0*deg ;
191 fPhiSegment = 180*deg ;
192 fTheta = 0*deg ;
193 fThetaSegment = 180*deg ;
194 aVolume = new G4Sphere ("aHalfHollowSphere", fTrackerR1, fTrackerR2 ,fPhi, fPhiSegment, fTheta, fThetaSegment);
195
196 }
197 else if (val == "Q1Shell")
198 {
199 // only solid sphere is supportet for now
200 fTrackerR1 =(lysoR-0.01*mm)/4. ;
201 fTrackerR2 =(lysoR-0.01*mm)/2. ;
202 fPhi = 0*deg ;
203 fPhiSegment = 90*deg ;
204 fTheta = 0*deg ;
205 fThetaSegment = 90*deg ;
206 aVolume = new G4Sphere ("aQ1Shell", fTrackerR1, fTrackerR2 ,fPhi, fPhiSegment, fTheta, fThetaSegment);
207
208 }
209 else if (val == "Q2Shell")
210 {
211 // only solid sphere is supportet for now
212 fTrackerR1 =(lysoR-0.01*mm)/4. ;
213 fTrackerR2 =(lysoR-0.01*mm)/2. ;
214 fPhi = 90*deg ;
215 fPhiSegment = 90*deg ;
216 fTheta = 0*deg ;
217 fThetaSegment = 90*deg ;
218 aVolume = new G4Sphere ("aQ2Shell", fTrackerR1, fTrackerR2 ,fPhi, fPhiSegment, fTheta, fThetaSegment);
219
220 }
221 else if (val == "Q3Shell")
222 {
223 // only solid sphere is supportet for now
224 fTrackerR1 =(lysoR-0.01*mm)/4. ;
225 fTrackerR2 =(lysoR-0.01*mm)/2. ;
226 fPhi = 180*deg ;
227 fPhiSegment = 90*deg ;
228 fTheta = 0*deg ;
229 fThetaSegment = 90*deg ;
230 aVolume = new G4Sphere ("aQ3Shell", fTrackerR1, fTrackerR2 ,fPhi, fPhiSegment, fTheta, fThetaSegment);
231
232 }
233 else if (val == "Q4Shell")
234 {
235 // only solid sphere is supportet for now
236 fTrackerR1 =(lysoR-0.01*mm)/4. ;
237 fTrackerR2 =(lysoR-0.01*mm)/2. ;
238 fPhi = 270*deg ;
239 fPhiSegment = 90*deg ;
240 fTheta = 0*deg ;
241 fThetaSegment = 90*deg ;
242 aVolume = new G4Sphere ("aQ4Shell", fTrackerR1, fTrackerR2 ,fPhi, fPhiSegment, fTheta, fThetaSegment);
243
244 }
245 else if (val == "Q5Shell")
246 {
247 // only solid sphere is supportet for now
248 fTrackerR1 =(lysoR-0.01*mm)/4. ;
249 fTrackerR2 =(lysoR-0.01*mm)/2. ;
250 fPhi = 0*deg ;
251 fPhiSegment = 90*deg ;
252 fTheta = 90*deg ;
253 fThetaSegment = 90*deg ;
254 aVolume = new G4Sphere ("aQ5Shell", fTrackerR1, fTrackerR2 ,fPhi, fPhiSegment, fTheta, fThetaSegment);
255
256 }
257else if (val == "Q6Shell")
258 {
259 // only solid sphere is supportet for now
260 fTrackerR1 =(lysoR-0.01*mm)/4. ;
261 fTrackerR2 =(lysoR-0.01*mm)/2. ;
262 fPhi = 90*deg ;
263 fPhiSegment = 90*deg ;
264 fTheta = 90*deg ;
265 fThetaSegment = 90*deg ;
266 aVolume = new G4Sphere ("aQ5Shell", fTrackerR1, fTrackerR2 ,fPhi, fPhiSegment, fTheta, fThetaSegment);
267
268 }
269 else if (val == "Q7Shell")
270 {
271 // only solid sphere is supportet for now
272 fTrackerR1 =(lysoR-0.01*mm)/4. ;
273 fTrackerR2 =(lysoR-0.01*mm)/2. ;
274 fPhi = 180*deg ;
275 fPhiSegment = 90*deg ;
276 fTheta = 90*deg ;
277 fThetaSegment = 90*deg ;
278 aVolume = new G4Sphere ("aQ7Shell", fTrackerR1, fTrackerR2 ,fPhi, fPhiSegment, fTheta, fThetaSegment);
279
280 }
281 else if (val == "Q8Shell")
282 {
283 // only solid sphere is supportet for now
284 fTrackerR1 =(lysoR-0.01*mm)/4. ;
285 fTrackerR2 =(lysoR-0.01*mm)/2. ;
286 fPhi = 270*deg ;
287 fPhiSegment = 90*deg ;
288 fTheta = 90*deg ;
289 fThetaSegment = 90*deg ;
290 aVolume = new G4Sphere ("aQ8Shell", fTrackerR1, fTrackerR2 ,fPhi, fPhiSegment, fTheta, fThetaSegment);
291
292 }
293
294
295 else if (val == "Shell")
296 {
297
298 // Test for Problem Report with Optical Photons and Sphere or Ellipsoid
299 G4Sphere *newSOut = new G4Sphere("Crystal",0.,lysoR-0.01/mm,0,twopi,0,pi/2);
300 G4Sphere *newSIn = new G4Sphere("Crystal",0.,lysoR-4.01/mm,0,twopi,0,twopi);
301
302 // Box was added in user application in order to avoid problem with Sphere with theta=90 deg
303 // Not need anymore, this bug in Sphere was repared in 4.9.2.
304 // G4Box* farMirrorBox2 = new G4Box("nearMirrorBox", lysoR-0.01/mm,
305 // lysoR-0.01/mm, lysoR-0.01/mm);
306 // aVolume = new G4IntersectionSolid("GlassMirror", farMirrorBox2,shell,0,G4ThreeVector(0,0,-lysoR));
307 aVolume = new G4SubtractionSolid("OutsideminInside", newSOut, newSIn);
308
309 }
310 else if (val == "Ring")
311 {
312 // only solid sphere is supportet for now
313 fTrackerR1 =(lysoR-0.01*mm)/4. ;
314 fTrackerR2 =(lysoR-0.01*mm)/2. ;
315 fPhi = 30*deg ;
316 fPhiSegment = 120*deg ;
317 fTheta = 10*deg ;
318 fThetaSegment = 40*deg ;
319 aVolume = new G4Sphere ("aRing", fTrackerR1, fTrackerR2 ,fPhi, fPhiSegment, fTheta, fThetaSegment);
320
321 }
322 else if ( val == "Ellipsoid" ) {
323
324 fSemiAxisX = (lysoR-0.01*mm)/4. ;
325 fSemiAxisY = (lysoR-0.01*mm)/2. ;
326 fSemiAxisZ = (lysoR-0.01*mm)/2. ;
327
328 aVolume = new G4Ellipsoid("aEllipsoid",
329 fSemiAxisX,
330 fSemiAxisY,
331 fSemiAxisZ,
332 -fSemiAxisX,fSemiAxisX);
333
334
335 }
336 else if (val == "Orb")
337 {
338
339 fTrackerR = (lysoR-0.01*mm)/2. ;
340 aVolume = new G4Orb ( "aOrb", fTrackerR );
341
342 }
343 else if (val == "Box")
344 {
345
346 fTrackerpDx1 = (lysoR-0.01*mm)/2. ;
347 fTrackerpDy1 = (lysoR-0.01*mm)/2. ;
348 fTrackerpDz = (lysoR-0.01*mm)/2. ;
349
350 aVolume = new G4Box ( "aBox", fTrackerpDx1, fTrackerpDy1, fTrackerpDz );
351 }
352 else if (val == "Cons")
353 {
354
355 fTrackerpDz =(lysoR-0.01*mm)/2. ;
356 fTrackerR1 =(lysoR-0.01*mm)/4. ;
357 fTrackerR2 =(lysoR-0.01*mm)/2. ;
358
359 aVolume = new G4Cons ( "aCons", 0.8*fTrackerR1 , fTrackerR1, 0.8*fTrackerR2, fTrackerR2, fTrackerpDz, 10*deg, 220.*deg );
360
361 }
362 else if (val == "manyCons")
363 {
364 aVolume = new G4Cons ( "aCone", 2*mm, 3*mm, 2*mm, 4*mm,
365 3.*mm, 10*deg, 300*deg );
366 // 10*cm, 10*deg, 300*deg );
367 // 0., pi);
368
369
370 }
371 else if (val == "Tubs")
372 {
373
374 // only solid Tube is supported.
375
376 aVolume = new G4Tubs ( "aTube",0.1,5.9*mm,3.*mm,0.,180*deg) ;
377
378 }
379 else if (val == "Hype")
380 {
381 aVolume = new G4Hype ("aHype", 0.7, 1, 40*deg, 40*deg, 4. );
382 }
383 else if (val == "Torus")
384 {
385
386 fPhi = 40*deg ;
387 fPhiSegment = 200*deg ;
388
389 fTrackerR1 = 1.*mm ;
390 fTrackerR2 = 2.*mm ;
391 fTrackerR = (lysoR-0.01*mm) ;
392
393 aVolume = new G4Torus("aTorus", fTrackerR1, fTrackerR2 ,fTrackerR, fPhi, fPhiSegment) ;
394
395 }
396 else if (val == "Para")
397 {
398 aVolume = new G4Para ("aPara", 0.8, 1.0, 1.2, 30*deg, 45*deg, 60*deg);
399 }
400 else if (val == "Paraboloid")
401 {
402 aVolume = new G4Paraboloid ("aParaboloid", 1., 0.5, 1.2);
403 }
404 else if (val == "PolyconeGen")
405 {
406 G4double rr[]={1,1.20,1.40,1.20};
407 G4double zz[]={-1,-1,1,1};
408 aVolume = new G4Polycone ("aPolycone",0*deg,90*deg, 4, rr,zz);
409 }
410 else if (val == "PolyconeGenComplex")
411 { //has to be apdated
412 G4double zPlanes[] = {-11640.*mm, -11640.*mm, -11570.722*mm, -9766.005*mm,
413 -4487.828*mm, 4487.828*mm, 9766.005*mm, 11570.722*mm,
414 11640.*mm, 11640.*mm, 11580.*mm, 9750.*mm,
415 4500.*mm, -4500.*mm, -9750.*mm, -11580.*mm,
416 -11640.*mm};
417
418 G4double radius[] = {250.*mm, 305.*mm, 305.*mm, 2770.461*mm,
419 4932.*mm, 4932.*mm, 2770.461*mm, 305.*mm,
420 305.*mm, 250.*mm, 250.*mm, 2750.*mm,
421 4900.*mm, 4900.*mm, 2750.*mm, 250.*mm,
422 250.*mm};
423 aVolume = new G4Polycone ("aPolycone",0*deg,360*deg, 16, radius,zPlanes);
424 G4VSolid* SolidPumpPort = new G4Tubs("PumpPort temp tube", 0 * mm, 1750 / 2 * mm, (11161 - 4500) / 2 * mm-1*mm, 0, 360 * deg);
425 for (int i=0;i<2;i++)
426 {
427 G4RotationMatrix* Rot = new G4RotationMatrix();
428 Rot->rotateZ(45*(-i-1) * deg );
429 G4double X = std::cos(45*(i+1)*deg)*-(3050+4750)/2*mm;
430 G4double Y = std::sin(45*(i+1)*deg)*-(3050+4750)/2*mm;
431 aVolume = new G4SubtractionSolid("Main Spectrometer", aVolume, SolidPumpPort,
432 Rot, G4ThreeVector(X, Y,(11161+4500)/2*mm - 100 * mm));
433 }
434
435
436
437 }
438 else if (val == "Polycone")
439 {
440 G4double rIn[]={1.00,1.20,0,0,1.20,1.20};
441 G4double rOut[]={1.20,1.40,1.40,1.20,1.40,1.60};
442 G4double zPlane[]={-2.00,-1.00,0,1.00,2.00,3.00};
443 aVolume = new G4Polycone ("aPolycone",0*deg,260*deg, 6,zPlane, rIn,rOut);
444 }
445 else if (val == "PolyhedraGen")
446 {
447 G4double rr[]={1.00,1.20,1.40,1.20};
448 G4double zz[]={-1.00,-1.00,1.00,1.00};
449 aVolume = new G4Polyhedra ("aPolycone",0*deg,90*deg,8, 4, rr,zz);
450 }
451 else if (val == "PolyhedraGenComplex")
452 {
453 G4double rr[]={ 1.00, 1.20, 0, 0,1.40,1.20,1.50,1.50,1.50,1.40, 1.30};
454 G4double zz[]={-1.50,-1.00,-1.00,-0.50, 0,2.00,2.00,1.00,0, -0.50,-1.00};
455 aVolume = new G4Polyhedra ("aPolycone",0*deg,260*deg,8, 11, rr,zz);
456 }
457 else if (val == "Polyhedra")
458 {
459 G4double rOut[5]={2.100,0.600,1.500,1.500,3.800};
460 G4double rIn[5]={0,0.500,0,0.700,0.100};
461 G4double zPlane[5]={-0.100,1.000,1.500,2.500,3.000};
462 aVolume = new G4Polyhedra ("aPolycone",0*deg,260*deg,6, 5,zPlane, rIn,rOut);
463 }
464
465 else if (val == "Trd")
466 {
467 aVolume = new G4Trd ("aTrd", 0.80, 1.00, 0.70,0.90, 1.00);
468 }
469 else if (val == "b1Ub2")
470 {
471 aVolume = new G4UnionSolid("b1Ub2",b1,b2);
472
473 }
474 else if (val == "b1Ib2")
475 {
476 aVolume = new G4IntersectionSolid("b1Ib2",b1,b2);
477 }
478 else if (val == "b1Sb2")
479 {
480 aVolume = new G4SubtractionSolid("b1Sb2",b1,b2);
481 }
482 else if (val == "b1Ib1")
483 {
484 aVolume = new G4IntersectionSolid("b1Ib1",b1,b1);
485 }
486 else if (val == "b1Ub1")
487 {
488 aVolume = new G4UnionSolid("b1Ub1",b1,b1);
489 }
490 else if (val == "b1Sb1")
491 {
492 aVolume = new G4SubtractionSolid("b1Sb1",b1,b1);
493 }
494
495 else if ( val == "Tet" )
496 {
497 G4ThreeVector anchor = G4ThreeVector( 0, 0, 0);
498 G4ThreeVector p2 = G4ThreeVector(1.0, 0.5, 0);
499 G4ThreeVector p3 = G4ThreeVector(0.5, 1.0, 0);
500 G4ThreeVector p4 = G4ThreeVector(0.5, 0.5, 1.0);
501
502 aVolume = new G4Tet("aTet",anchor,p2,p3,p4);
503 }
504 else if ( val == "Trap")
505 {
506 fTrackerpDz = 0.80;
507 fTheta = 10*deg ;
508 fPhi = 40*deg ;
509 fTrackerpDy1 = 1.6 ;
510 fTrackerpDx1 = 2.4 ;
511 G4double fTrackerpDx2 = 1.4 ;
512 G4double fTrackerpDy2 = 0.8 ;
513 G4double fTrackerpDx3 = 1.6 ;
514 G4double fTrackerpDx4 = 1.1 ;
515 G4double fAlph = 50*deg ;
516
517 aVolume = new G4Trap("aTrap",
518 fTrackerpDz, // half z length
519 fTheta, // direction between end planes
520 fPhi, // defined by polar and azimutal angles.
521 fTrackerpDy1, // half y length at -pDz
522 fTrackerpDx1, // half x length at -pDz,-pDy
523 fTrackerpDx2, // half x length at -pDz,+pDy
524 fAlph, // tilt angle at +pDz
525 fTrackerpDy2, // half y length at +pDz
526 fTrackerpDx3, // half x length at +pDz,-pDy
527 fTrackerpDx4, // half x length at +pDz,+pDy
528 fAlph // tilt angle at +pDz
529 ) ;
530
531
532 }
533 else if ( val == "EllipticalCone" )
534 {
535 aVolume = new G4EllipticalCone("aEllipticalCone",
536 0.5, // xSemiAxis
537 1, // ySemiAxis
538 4.0, // zheight
539 2.5) ; // zTopCut
540
541 }
542 else if ( val == "EllipticalTube" )
543 {
544 aVolume = new G4EllipticalTube("aEllipticalTube" ,
545 2, // xSemiAxis
546 4, // ySemiAxis
547 3.5) ; // zheight
548
549 }
550
551 else if (val == "TwistedBox")
552 {
553 aVolume = new G4TwistedBox("aTwistedBox",40*deg,0.5,1.0,1.5);
554 }
555 else if (val == "TwistedTrd")
556 {
557 aVolume = new G4TwistedTrd("aTwistedTrd",0.5,1.0,0.8,1.5,1.8,20*deg);
558 }
559 else if (val == "TwistedTrap")
560 {
561 aVolume = new G4TwistedTrap("aTwistedTrap",40*deg,0.5,1.0,0.8,1.5);
562 }
563 else if ( val == "TwistedTrap2")
564 {
565 aVolume = new G4TwistedTrap("aTwistedTrap2",
566 20*deg, // twist angle
567 0.80, // half z length
568 10*deg, // direction between end planes
569 40*deg, // defined by polar and azimutal angles.
570 0.8, // half y length at -pDz
571 1.1, // half x length at -pDz,-pDy
572 1.6, // half x length at -pDz,+pDy
573 0.8, // half y length at +pDz
574 1.1, // half x length at +pDz,-pDy
575 1.6, // half x length at +pDz,+pDy
576 -50*deg // tilt angle at +pDz
577 ) ;
578 }
579 else if ( val == "TwistedTubs")
580 {
581 aVolume = new G4TwistedTubs("aTwistedTubs",10.*deg,1.0,2.,4.,171.*deg);
582
583 }
584 else if (val == "GenericTrap" ){
585 std::vector<G4TwoVector> vertices;
586 vertices.push_back(G4TwoVector( -4.5, -4.5));
587 vertices.push_back(G4TwoVector( -4.5, 4.5));
588 vertices.push_back(G4TwoVector( 4.5, 4.5));
589 vertices.push_back(G4TwoVector( 4.5, -4.5));
590 vertices.push_back(G4TwoVector( -3.5, -3.5));
591 vertices.push_back(G4TwoVector( -3.5, 3.5));
592 vertices.push_back(G4TwoVector( 3.5, 3.5));
593 vertices.push_back(G4TwoVector( 3.5, -2.5));
594 aVolume = new G4GenericTrap("aGenTrd",4.,vertices);
595 }
596else if(val == "TessellatedSolid")
597 {
598 G4double targetSize = 2.;
599 G4TessellatedSolid* aVolume1 = new G4TessellatedSolid("aTessellatedSolid");
600 G4TriangularFacet *facet1 = new
601 G4TriangularFacet (G4ThreeVector(-targetSize,-targetSize, 0.0),
602 G4ThreeVector(+targetSize,-targetSize, 0.0),
603 G4ThreeVector( 0.0, 0.0,+targetSize),
604 ABSOLUTE);
605 G4TriangularFacet *facet2 = new
606 G4TriangularFacet (G4ThreeVector(+targetSize,-targetSize, 0.0),
607 G4ThreeVector(+targetSize,+targetSize, 0.0),
608 G4ThreeVector( 0.0, 0.0,+targetSize),
609 ABSOLUTE);
610 G4TriangularFacet *facet3 = new
611 G4TriangularFacet (G4ThreeVector(+targetSize,+targetSize, 0.0),
612 G4ThreeVector(-targetSize,+targetSize, 0.0),
613 G4ThreeVector( 0.0, 0.0,+targetSize),
614 ABSOLUTE);
615 G4TriangularFacet *facet4 = new
616 G4TriangularFacet (G4ThreeVector(-targetSize,+targetSize, 0.0),
617 G4ThreeVector(-targetSize,-targetSize, 0.0),
618 G4ThreeVector( 0.0, 0.0,+targetSize),
619 ABSOLUTE);
620 G4QuadrangularFacet *facet5 = new
621 G4QuadrangularFacet (G4ThreeVector(-targetSize,-targetSize, 0.0),
622 G4ThreeVector(-targetSize,+targetSize, 0.0),
623 G4ThreeVector(+targetSize,+targetSize, 0.0),
624 G4ThreeVector(+targetSize,-targetSize, 0.0),
625 ABSOLUTE);
626
627 aVolume1->AddFacet((G4VFacet*) facet1);
628 aVolume1->AddFacet((G4VFacet*) facet2);
629 aVolume1->AddFacet((G4VFacet*) facet3);
630 aVolume1->AddFacet((G4VFacet*) facet4);
631 aVolume1->AddFacet((G4VFacet*) facet5);
632
633 aVolume1->SetSolidClosed(true);
634
635 aVolume = aVolume1;
636
637 }
638 else if (val == "ExtrudedSolid")
639 {
640 std::vector<G4TwoVector> polygon;
641 polygon.push_back(G4TwoVector(-3., -3.0));
642 polygon.push_back(G4TwoVector(-3., 3.0));
643 polygon.push_back(G4TwoVector( 3., 3.0));
644 polygon.push_back(G4TwoVector( 3., -3.0));
645 polygon.push_back(G4TwoVector( 1.5, -3.0));
646 polygon.push_back(G4TwoVector( 1.5, 1.5));
647 polygon.push_back(G4TwoVector(-1.5, 1.5));
648 polygon.push_back(G4TwoVector(-1.5, -3.0));
649
650 std::vector<G4ExtrudedSolid::ZSection> zsections;
651 zsections.push_back(G4ExtrudedSolid::ZSection(-4.0, G4TwoVector(-2.0, 1.0), 1.5));
652 zsections.push_back(G4ExtrudedSolid::ZSection( 1.0, G4TwoVector( 0, 0), 0.5));
653 zsections.push_back(G4ExtrudedSolid::ZSection( 1.5, G4TwoVector( 0, 0), 0.7));
654 zsections.push_back(G4ExtrudedSolid::ZSection( 4.0, G4TwoVector( 2.0, 2.0), 0.9));
655
656 aVolume = new G4ExtrudedSolid("aExtrudedSolid", polygon, zsections);
657 }
658
659
660 else
661 { G4cout <<"DetectorConstruction tried to select "<<val<<G4endl;
662 G4Exception("DetectorConstruction::SelectDetector() - Invalid shape!");
663 }
664
665 return aVolume;
666
667}
668G4VPhysicalVolume* AXPETDetectorConstruction::Construct()
669{
670 //***********************************************
671 // Clear all Stores
672 //***********************************************
673
674 G4GeometryManager::GetInstance()->OpenGeometry();
675 G4PhysicalVolumeStore::GetInstance()->Clean();
676 G4LogicalVolumeStore::GetInstance()->Clean();
677 G4SolidStore::GetInstance()->Clean();
678
679 pttoMaterial->DefineMaterials();
680
681 air = pttoMaterial->GetMat("AIR");
682 lyso= pttoMaterial->GetMat("LYSO");
683 vacuum= pttoMaterial->GetMat("Galactic");
684
685
686 //***********************************************
687 // Defining the world volume
688 //***********************************************
689
690 WorldVolume = new G4Box("World",worldXsize,worldYsize,worldZsize);
691
692 LogWorldVolume = new G4LogicalVolume(WorldVolume,
693 vacuum,
694 "logicWorld",
695 0,0,0);
696
697 PhysWorldVolume = new G4PVPlacement(0, G4ThreeVector(),
698 "physicalWorld",
699 LogWorldVolume,
700 0,false,0);
701
702
703 //***********************************************
704 // Defining the lyso-Solid volume
705 //***********************************************
706
707
708 LYSOVolume=SelectDetector(fval);
709 LogLYSOVolume = new G4LogicalVolume(LYSOVolume,
710 lyso,
711 "logicLYSO",
712 0,0,0);
713
714 G4RotationMatrix *mat=new G4RotationMatrix();
715 if(xRot!=0.)mat->rotateX(xRot*deg);
716 if(yRot!=0.)mat->rotateY(xRot*deg);
717 if(zRot!=0.)mat->rotateZ(xRot*deg);
718 // mat->rotateY(180.*deg);
719 // mat->rotateZ(10.*deg);
720 G4ThreeVector position=G4ThreeVector(1.0,1.0,1.0);
721
722 PhysLYSOVolume = new G4PVPlacement(mat,G4ThreeVector(0.0,0.0,0.0),
723 LogLYSOVolume,
724 "physicalLYSO",
725 LogWorldVolume,
726 0,false,0);
727
728 G4cout << "The LYSO crystal is built as "<<fval << G4endl;
729
730
731
732
733 //************************************************************************
734 //Al coated surface properties
735 //************************************************************************
736
737 const G4int nEntries = 11;
738 const G4double refl = 0.85;
739
740 G4double PhotonEnergy[nEntries] = {2.478*eV, 2.53*eV, 2.58*eV, 2.636*eV, 2.69*eV, 2.75*eV, 2.816*eV, 2.88*eV, 2.95*eV, 3.022*eV, 3.097*eV};
741
742 G4double Reflectivity[nEntries] = {refl, refl,refl, refl, refl, refl, refl, refl, refl, refl, refl};
743 G4double Efficiency[nEntries] = {0.0, 0.0,0.0, 0.0,0.0, 0.0,0.0, 0.0,0.0, 0.0,0.0};
744 G4double specularlobe[nEntries] = {0.0, 0.0,0.0, 0.0,0.0, 0.0,0.0, 0.0,0.0, 0.0,0.0};
745 G4double specularspike[nEntries] = {0.9, 0.9,0.9, 0.9,0.9, 0.9,0.9, 0.9,0.9, 0.9,0.9};
746 G4double backscatter[nEntries] = {0.0, 0.0,0.0, 0.0,0.0, 0.0,0.0, 0.0,0.0, 0.0,0.0};
747 G4double rindex[nEntries] = {1.39, 1.39,1.39, 1.39,1.39,1.39,1.39, 1.39,1.39, 1.39,1.39};
748
749
750 G4OpticalSurface* alcoated_opsurf= new G4OpticalSurface("alcoated_opsurf");
751 new G4LogicalBorderSurface("alcoated_surf",PhysLYSOVolume,PhysWorldVolume, alcoated_opsurf);
752
753
754 G4MaterialPropertiesTable* alcoated_mt = new G4MaterialPropertiesTable();
755 alcoated_mt->AddProperty("RINDEX", PhotonEnergy,rindex, nEntries );
756 alcoated_mt->AddProperty("EFFICIENCY", PhotonEnergy,Efficiency, nEntries );
757 alcoated_mt->AddProperty("REFLECTIVITY",PhotonEnergy,Reflectivity,nEntries);
758 alcoated_mt->AddProperty("SPECULARLOBECONSTANT",PhotonEnergy,specularlobe,nEntries);
759 alcoated_mt->AddProperty("SPECULARSPIKECONSTANT",PhotonEnergy,specularspike,nEntries);
760 alcoated_mt->AddProperty("BACKSCATTERCONSTANT",PhotonEnergy,backscatter,nEntries);
761
762
763 alcoated_opsurf->SetType(dielectric_metal);
764 alcoated_opsurf->SetModel(unified);
765 alcoated_opsurf->SetFinish(groundbackpainted/*polished*/);
766
767
768 alcoated_opsurf->SetMaterialPropertiesTable(alcoated_mt);
769
770
771 G4VisAttributes* WhiteVisAtt= new G4VisAttributes(G4Colour(1.0,1.0,1.0));//red
772 WhiteVisAtt->SetVisibility(true);
773 WhiteVisAtt->SetForceSolid(true);
774
775 G4VisAttributes* LysoVisAtt= new G4VisAttributes(G4Colour(0.0,0.0,1.0));//red
776 LysoVisAtt->SetVisibility(true);
777 LysoVisAtt->SetForceSolid(true);
778
779 G4VisAttributes* DeteVisAtt= new G4VisAttributes(G4Colour(1.0,1.0,0.0));//yellow
780 DeteVisAtt->SetVisibility(true);
781 DeteVisAtt->SetForceSolid(true);
782
783 LogLYSOVolume->SetVisAttributes(LysoVisAtt);
784 LogWorldVolume->SetVisAttributes(G4VisAttributes::GetInvisible());
785
786 return PhysWorldVolume;
787
788 }
789
Note: See TracBrowser for help on using the repository browser.