$Id: README,v 1.9 2010/04/02 13:22:02 maire Exp $
-------------------------------------------------------------------

     =========================================================
     Geant4 - an Object-Oriented Toolkit for Simulation in HEP
     =========================================================

                            TestEm14
                            --------

	How to compute cross sections from the direct evaluation of the mean
	free path ( see below, item Physics).
	How to plot final state of a process.	 
	
 1- GEOMETRY DEFINITION
 
 	It is a single box representing a 'semi infinite' homogeneous medium.
 	Two parameters define the geometry :
 	- the material of the box,
	- the (full) size of the box.
 	
 	The default geometry (100 m of water) is constructed in 
	DetectorConstruction, but the above parameters can be changed 
	interactively via the commands defined in DetectorMessenger.
 	
 2- PHYSICS LIST
 
 	The physics list contains the standard electromagnetic processes.
	In order not to introduce 'artificial' constraints on the step size, the
	multiple scattering is not instanciated, and all processes are
	registered as discrete : there is no continuous energy loss.  
 	 
 3- AN EVENT : THE PRIMARY GENERATOR
 
 	The primary kinematic consists of a single particle starting at the edge
	of the box. The type of the particle and its energy are set in 
	PrimaryGeneratorAction (1 MeV gamma), and can be changed via the G4 
 	build-in commands of ParticleGun class (see the macros provided with 
 	this example).
 	
 4- PHYSICS
 
	An event is killed at the first interaction of the incident paticle.
	The absorption length, also called mean free path, is computed as 
	the mean value of the track length of the incident particle.
	This is why the medium must be 'infinite' : to be sure that interaction
	occurs at any events.
	
	The result is compared with the 'input' data, i.e. with the cross
	sections stored in the PhysicsTables and used by Geant4.
	
	The energy spectrum and the angular distribution of the scattered
	particle (if any) and of the created secondaries are plotted (see
	SteppingAction).
 	
 	A set of macros defining various run conditions are provided.
 	The processes are actived/inactived in order to survey the processes 
	individually.

 5- HISTOGRAMS
         
	The test contains 6 built-in 1D histograms, which are managed by the
	HistoManager class and its Messenger. The histos can be individually 
	activated with the command :
	/testem/histo/setHisto id nbBins  valMin valMax unit 
	where unit is the desired unit for the histo (MeV or keV, etc..)
	(see the macros xxxx.mac).
 
	1	"scattered primary particle: energy spectrum"
	2	"scattered primary particle: costheta distribution"
	3	"charged secondaries: energy spectrum"
	4	"charged secondaries: costheta distribution"
	5	"neutral secondaries: energy spectrum"
	6	"neutral secondaries: costheta distribution"			

	See below the note on histogram tools.
	
 	One can control the name and the type of the histograms file with 
	the commands:
 	/testem/histo/setFileName  name  (default testem14)
   	/testem/histo/setFileType  name  (default root)
   
        It is also possible to print selected histograms on an ascii file:
        /testem/histo/printHisto id
        All selected histos will be written on a file name.ascii  
	(default testem14) 
	
	Note that, by default, histograms are disabled. To activate them, 
	uncomment the flag G4ANALYSIS_USE in GNUmakefile. 	
 	 				
 6- VISUALIZATION
 
 	The Visualization Manager is set in the main().
 	The initialisation of the drawing is done via the commands
 	/vis/... in the macro vis.mac. To get visualisation:
 	> /control/execute vis.mac
 	
 	The detector has a default view which is a longitudinal view of the 
 	box.
 	
 	The tracks are drawn at the end of event, and erased at the end of run.
	
 7- HOW TO START ?
 
	compile and link to generate an executable
 		% cd geant4/examples/extended/electromagnetic/TestEm14
 		% gmake
 		
	execute TestEm14 in 'batch' mode from macro files :
 		% TestEm14   compt.mac
 		
	execute TestEm14 in 'interactive mode' with visualization :
 		% TestEm14
		Idle> control/execute vis.mac
 		....
 		Idle> type your commands
 		....
 		Idle> exit
 

 8- USING HISTOGRAMS
 
  By default the histograms are not activated. To activate histograms
  the environment variable G4ANALYSIS_USE should be defined. For instance
  uncomment the flag G4ANALYSIS_USE in GNUmakefile.
  
  Before compilation of the example it is optimal to clean up old files:
  	gmake histclean
  	gmake
	 
  To use histograms, at least one of the AIDA implementations should be 
  available. See InstallAida.txt