SETTINGS SAVED TO FILE

"; } else { echo "NO FILE SELECTED YET.. PLEASE DO SO HERE

"; } } ?>

Electroweak Processes

This page contains processes involving Prompt-photon, gamma^*/Z^0 and W^+- production, plus a few with t-channel boson exchange.

Prompt photon processes

This group collects the processes where one or two photons are produced by the hard process. Additional sources of photons include parton showers and hadron decays. A pT cut is required to stay away from the unphysical low-pT region. An eikonalized description, intended to be valid at all pT, is included as part of the multiparton-interactions framework.

PromptPhoton:all On Off   (default = off)
Common switch for the group of all prompt photon processes, as listed separately in the following.

PromptPhoton:qg2qgamma On Off   (default = off)
Scattering q g -> q gamma. Code 201.

PromptPhoton:qqbar2ggamma On Off   (default = off)
Scattering q qbar -> g gamma. Code 202.

PromptPhoton:gg2ggamma On Off   (default = off)
Scattering g g -> g gamma.
Note: This is a box graph. The full quark-mass dependence in the loop leads to very complicated expressions. The current implementation is based on assuming five massless quarks (see below), and thus is questionable at small (pT < m_b) or large (pT > m_t) transverse momenta. Code 203.

PromptPhoton:ffbar2gammagamma On Off   (default = off)
Scattering q qbar -> gamma gamma. Code 204.

PromptPhoton:gg2gammagamma On Off   (default = off)
Scattering g g -> gamma gamma.
Note: This is a box graph. The full quark-mass dependence in the loop leads to very complicated expressions. The current implementation is based on assuming five massless quarks (see below), and thus is questionable at small (pT < m_b) or large (pT > m_t) transverse momenta. Code 205.

PromptPhoton:nQuarkLoop   (default = 5; minimum = 3; maximum = 6)
Number of quark flavours included in the box graphs resposible for g g -> g gamma and g g-> gamma gamma processes. Owing to the complexity if the massive expressions, quarks are treated as massless. The default value should be applicable in the range of transverse momenta above the b mass but below the t one.

Weak boson processes

Under this heading we group processes involving the production of a single electroweak gauge boson, i.e. a gamma^*/Z^0 or a W^+-, or a pair of them, or one of them in combination with a parton. Since the three sets are partly conflicting, each is associated with its own group flag. In addition, t-channel exchange of such a boson between two fermions form a separate group.

There is one flag that can be used to influence the gamma^*/Z^0 structure in all the processes below where it is produced, unless otherwise stated.

WeakZ0:gmZmode   (default = 0; minimum = 0; maximum = 2)
Choice of full gamma^*/Z^0 structure or not in relevant processes.
0 : full gamma^*/Z^0 structure, with interference included.
1 : only pure gamma^* contribution.
2 : only pure Z^0 contribution.

Note: irrespective of the option used, the particle produced will always be assigned code 23 for Z^0, and open decay channels is purely dictated by what is set for the Z^0.

Boson exchange

The two processes in this subgroup is included as part of the multiparton-interactions framework.

WeakBosonExchange:all On Off   (default = off)
Common switch for the group of gamma^*/Z^0 or W^+- exchange between two fermions.

WeakBosonExchange:ff2ff(t:gmZ) On Off   (default = off)
Scattering f f' -> f f' via gamma^*/Z^0 t-channel exchange, with full interference between the gamma^* and Z^0. Code 211.

WeakBosonExchange:ff2ff(t:W) On Off   (default = off)
Scattering f_1 f_2 -> f_3 f_4 via W^+- t-channel exchange. Code 212.

Single boson



WeakSingleBoson:all On Off   (default = off)
Common switch for the group of a single gamma^*/Z^0 or W^+- production.

WeakSingleBoson:ffbar2gmZ On Off   (default = off)
Scattering f fbar -> gamma^*/Z^0, with full interference between the gamma^* and Z^0. Code 221.

WeakSingleBoson:ffbar2W On Off   (default = off)
Scattering f fbar' -> W^+-. Code 222.

WeakSingleBoson:ffbar2ffbar(s:gm) On Off   (default = off)
Scattering f fbar -> gamma^* -> f' fbar'. Subset of process 221, but written as a 2 -> 2 process, so that pT can be used as ordering variable, e.g. in multiparton interactions. Hardcoded for the final state being either of the five quark flavours or three lepton ones. Not included in the WeakSingleBoson:all set, but included in the multiparton-interactions framework. Code 223.

Boson pair

Note that, in the decay of the two vector bosons produced by an f fbar -> V V process, the full four-fermion correlations from the leading-order f fbar -> V V -> 4f matrix elements are included [Gun86] (with some extensions by the authors). The matrix elements are provided in the double-resonant approach, i.e. excludes graph like f fbar -> V -> f fbar -> f fbar V -> 4f.

WeakDoubleBoson:all On Off   (default = off)
Common switch for the group of pair production of gamma^*/Z^0 and W^+-.

WeakDoubleBoson:ffbar2gmZgmZ On Off   (default = off)
Scattering f fbar' -> gamma^*/Z^0 gamma^*/Z^0. Code 231.

WeakDoubleBoson:ffbar2ZW On Off   (default = off)
Scattering f fbar' -> Z^0 W^+-. Note that here the gamma^* contribution is not (currently) included. Code 232.

WeakDoubleBoson:ffbar2WW On Off   (default = off)
Scattering f fbar -> W^+ W^-. Code 233.

Boson and parton



WeakBosonAndParton:all On Off   (default = off)
Common switch for the group of production of a single electroweak gauge boson, i.e. a gamma^*/Z^0 or a W^+-, in association with a parton, i.e. a quark, gluon, photon or lepton. These processes give first-order corrections to the ones in the WeakSingleBoson class, and both sets cannot be used simultaneously without unphysical doublecounting. The current class should only be used to study the high-pT tail of the gauge-boson production processes (for LHC applications at least pT > 20 GeV), while the ones in WeakSingleBoson should be used for inclusive production.

WeakBosonAndParton:qqbar2gmZg On Off   (default = off)
Scattering q qbar -> gamma^*/Z^0 g. Code 241.

WeakBosonAndParton:qg2gmZq On Off   (default = off)
Scattering q g -> gamma^*/Z^0 q . Code 242.

WeakBosonAndParton:ffbar2gmZgm On Off   (default = off)
Scattering f fbar -> gamma^*/Z^0 gamma. Code 243.

WeakBosonAndParton:fgm2gmZf On Off   (default = off)
Scattering f gamma -> gamma^*/Z^0 f. Code 244.

WeakBosonAndParton:qqbar2Wg On Off   (default = off)
Scattering q qbar -> W^+- g. Code 251.

WeakBosonAndParton:qg2Wq On Off   (default = off)
Scattering q g -> W^+- q. Code 252.

WeakBosonAndParton:ffbar2Wgm On Off   (default = off)
Scattering f fbar -> W^+- gamma. Code 253.

WeakBosonAndParton:fgm2Wf On Off   (default = off)
Scattering f gamma -> W^+- f. Code 254.

Photon Collision Processes

A few electroweak two-photon production processes are available. To use them, photon PDFs have to be defined for the incoming beam particles. For proton beams an appropriate set would be MRST QED 2004 [Mar05], available in the LHAPDF library.

PhotonCollision:all On Off   (default = off)
Common switch for the group of six processes presented below.

PhotonCollision:gmgm2qqbar On Off   (default = off)
Scatterings gamma gamma -> q qbar, where q is a light quark (u, d, s) . Code 261.

PhotonCollision:gmgm2ccbar On Off   (default = off)
Scattering gamma gamma -> c cbar. Code 262.

PhotonCollision:gmgm2bbbar On Off   (default = off)
Scattering gamma gamma -> b bbar. Code 263.

PhotonCollision:gmgm2ee On Off   (default = off)
Scattering gamma gamma -> e+ e-. Code 264.

PhotonCollision:gmgm2mumu On Off   (default = off)
Scattering gamma gamma -> mu+ mu-. Code 265.

PhotonCollision:gmgm2tautau On Off   (default = off)
Scattering gamma gamma -> tau+ tau-. Code 266. "?>