source: JEM-EUSO/ICRC2013/Template/Article/icrc2013-template-JEM-EUSO.tex @ 127

%%
% 33nd International Cosmic Ray Conference - 2013 - Rio de Janeiro, Brazil
% Template adapted from the 2011 ICRC template.

\documentclass[a4paper]{article}

\usepackage{icrc2013}

%The paper title
\title{Template of JEM-EUSO ICRC2013 Proceedings}

%The short title to appear at the header of the pages.
\shorttitle{JEM EUSO ICRC 2013}

%All paper authors
\authors{
Author-1$^{1}$,
Author-2$^{2}$,
Author-3$^{1,4}$,
Author-4$^{3,5}$
for the JEM-EUSO Collaboration.
}

%All the affiliations.
\afiliations{
$^1$ Institute of Physics 1 \\
$^2$ Institute of Physics 2 \\
$^3$ Institute of Physics 3 \\
\scriptsize{
$^{4}$ now at: Institute of Physics 4. \\
$^{5}$ now at: Institute of Physics 5.
}
}

%email address of the contact person
\email{corresponding.author@JEM-EUSO.iss} 

%The abstract.
\abstract{This template is simple example of how the papers for the Proceedings of the
33nd International Cosmic Ray Conference should be prepared. This template should be used for those who are going to present its work in oral and poster.
{\bf Invited, Rapporteur and Highlight talks should not use this template.}
The ICRC 2013 is going to be in Rio de Janeiro, Brazil from 2 to 9 July 2013.
The Proceedings are going to be distributed in DVDs for the participants.
The final version of the Proceedings are also going to be available in the Conference webpage.
All source files must be submitted in a single compressed package (tar.gz).}

%The keywords
\keywords{JEM-EUSO, UHECR, space instrument, fluorescence}


\begin{document}
\maketitle

%Begin a section.
\section{General Requirement}

All papers should be written in English.

\subsection{File format}

This template is written in \LaTeX. We provide the style file {\bf
\em icrc2013.sty} and one figure {\bf icrc2013\_header.(eps and pdf)}
which should be placed in the working directory. The author can use LaTex or pdfLaTex to compile its source tex file. If LaTex is used the figures should be in eps format. If pdfLaTex is used the figures should be in pdf format.

The following convention should be used to name your files:

\begin{itemize}
\item icrc2013-XXXX.tex
\item icrc2013-XXXX-YY.(eps or pdf)
\item icrc2013-XXXX.(ps or dvi or pdf)
\end{itemize}

where XXXX stands for the ICRC abstract ID number of your
abstract written with four (4) digits (e.g., the manuscript
corresponding to the abstract number 88 translates into
icrc0088.pdf).

All those files must compressed in a single
package named icrc2013-XXXX.tar.gz. This file should be submitted.

\subsection{Page Formatting}

The maximum length of each paper for oral and poster presentation is 4 pages. The author is not allowed to change the width or height of the page.

{\bf IMPORTANT:} Do not include page numbers on your paper. Page
numbers will be assigned by the publisher.

{\bf REMINDER:} Please, remember to choose the {\bf short title} for your contribution (line 14 in the .tex file).

\section{Latex instructions}

\subsection{Equations}
Equations can be introduced without numbering

\begin{eqnarray*}
 y=a \ddot x + b \dot x + c
\end{eqnarray*}

or with numbering

\begin{equation}
 \chi^{2}= \sum\limits_{i=0}^{n}\frac{(t_{i}-t_{0}-ax_{i}-by_{i}-
 \alpha r_{i}/c)^{2}}{\sigma_{i}^{2}}
\end{equation}

The array environment can be used to introduce multiple-line
equations not to numerate:

\begin{eqnarray*}
(x+y)(x-y) & = & x^2-xy+xy-y^2 \\
           & = & x^2-y^2 \\
   (x+y)^2 & = & x^2+2xy+y^2
\end{eqnarray*}

or partly to numerate:

\begin{eqnarray}
(x+y)(x-y) & = & x^2-xy+xy-y^2 \nonumber \\
           & = & x^2-y^2 \\
   (x+y)^2 & = & x^2+2xy+y^2
\end{eqnarray}

The array environment can be used for expression of the following
type:

\[ \left( \begin{array}{c}
\left| \begin{array}{cc} x_{11} & x_{12} \\ x_{21} & x_{22}
\end{array} \right| x \\y \end{array} \right) \]

This is an example on show to add space:

\begin{equation}
f(n) = \left\{
  \begin{array}{l l}
    n/2 & \quad \textrm{if $n$ is even}\\
    -(n+1)/2 & \quad \textrm{if $n$ is odd}
  \end{array} \right.
\end{equation}

and how to remove space:

\begin{equation}
\left(\!\!
    \begin{array}{c}
      n \\
      r
    \end{array}
  \!\!\right) = \frac{n!}{r!(n-r)!}
\end{equation}

 \begin{figure*}[!t]
  \centering
  \includegraphics[width=\textwidth]{icrc2013-template-01}
  \caption{Wide figure example. Conference webpage header.}
  \label{wide_fig}
 \end{figure*}



\subsection{Lists}

You may create an itemized list with the places to see in Rio de Janeiro:

\begin{itemize}
\item Copabacana Beach
\item Corcovado
\item Sugar Loaf
\end{itemize}

An enumerated list with the rhythms to listen:

\begin{enumerate}
\item Bossa Nova
\item Choro
\item Samba
\end{enumerate}

Or a customized list with the food and drinks to taste:

\begin{itemize}
\item[$\gamma$] Brigadeiro
\item[$\beta$]  Caipirinha
\item[$\alpha$] Feijoada
\end{itemize}

\subsection{Footnotes}

Footnotes can be created with the footnote command\footnote{This is
a footnote example.}.


\subsection{Figures}

Single column figures and images as in figure \ref{simp_fig}
preferred. However, large figures can be made to span two columns. If you have to introduce two column
figures(e.g., figure \ref{wide_fig}), please verify that they do not
overflow the margins of the text.


 \begin{figure}[t]
  \centering
  \includegraphics[width=0.4\textwidth]{icrc2013-template-02}
  \caption{Simple figure example. Rio Scenarium Restaurant / Bar / Nightclub. Venue of the Conference Dinner.}
  \label{simp_fig}
 \end{figure}

\subsection{Tables}

Tables can be done at one (Table \ref{table_single}) and two columns. \\

\begin{table}[h]
\begin{center}
\begin{tabular}{|l|c|c|}
\hline Month & Temperature ($^\circ$C) & Precipitation (mm) \\ \hline
June   & 22  & 81.3 \\ \hline
July   & 22  & 55.9 \\ \hline
August & 22  & 50.8 \\ \hline
\end{tabular}
\caption{Weather conditions in the city of Rio de Janeiro. Average temperature and precipitation in each month.}
\label{table_single}
\end{center}
\end{table}



\section{Conclusions}

A list of references should be placed at the end of the paper. See
the below example. The citation to the references can be written as
\cite{bib:EUSOperf} or \cite{bib:EUSOperf,bib:schoenberg}.

\vspace*{0.5cm}
\footnotesize{{\bf Acknowledgment:}{This work was partially supported by Basic Science Interdisciplinary 
Research Projects of RIKEN and JSPS KAKENHI Grant (22340063, 23340081, and 
24244042), by the Italian Ministry of Foreign Affairs, General Direction 
for the Cultural Promotion and Cooperation, by the 'Helmholtz Alliance 
for Astroparticle Physics HAP' funded by the Initiative and Networking Fund 
of the Helmholtz Association, Germany, and by Slovak Academy  
of Sciences MVTS JEM-EUSO as well as VEGA grant agency project 2/0081/10.
The Spanish Consortium involved in the JEM-EUSO Space
Mission is funded by MICINN under projects AYA2009-
06037-E/ESP, AYA-ESP 2010-19082, AYA2011-29489-C03-
01, AYA2012-39115-C03-01, CSD2009-00064 (Consolider MULTIDARK)
and by Comunidad de Madrid (CAM) under project S2009/ESP-1496.
}}

\begin{thebibliography}{}

\bibitem{bib:EUSOperf} J.H. Adams Jr. et al. - JEM-EUSO Collaboration, Astroparticle Physics 44 (2013) 76-90 http://dx.doi.org/10.1016/j.astropartphys.2013.01.008 

\bibitem{bib:schoenberg} M. Sch\"onberg and S. Chandrasekhar, The Astrophysical Journal 96 (1942) 161-172 doi:10.1086/144444.

\end{thebibliography}

\end{document}