analattice | PLOTLATTICE - Plot the lattice |
at | at - functions specific to the Accelerator Toolbox |
atindex2family | ATINDEX2FAMILY - Returns the AT index for a given family |
atsummary | ATSUMMARY - Prints out the paramters of the current AT lattice |
atversion | ATVERSION - Returns the version information for AT |
bendalign | locate bend magnets in AO and return alignment to zero |
buildatindex | BUILDATINDEX - Return AT indices for a given Family |
calccoupling | CALCCOUPLING - Calculates the coupling and tilt of the AT model |
cavityoff | CAVITYOFF - Turns all cavities off |
crabcavity | CRABCAVITY('FAMILYNAME',phase [m],Voltage[V], Frequency[Hz], 'METHOD') |
drawlattice | DRAWLATTICE - Draws the AT lattice to a figure |
family2atindex | FAMILY2ATINDEX - Returns the AT index for a given family |
findorbit4initial | FINDORBIT4 finds the closed orbit in the transverse 4-d phase |
fittunedisp2 | FITTUNEDISP2 - Fits the linear tunes and the dispersion of model using 3 quadrupole families. |
getatfield | GETATFIELD - Returns the contents of an AT model field |
getcavity | GETCAVITY - Returns the RF cavity state ('On' / 'Off') |
getcod | GETCOD Closed Orbit Distortion |
getenergymodel | GETENERGYMODEL - Returns the model energy in GeV |
getenveloppe | % |
getharmonicnumber | GETHARMONICNUMBER - Returns the harmonic number from the AT model |
getkleff | GETKLEFF - Returns K * Leff in the AT deck |
getleff | GETLEFF - Returns the magnet length as in the AT deck [meters] |
getnusympmat | GETNUSYMPMAT - Calculate the tune from a symplectic one-turn matrix |
getpassmethod | GETPASSMETHOD - Gets the PassMethod field |
getpvmodel | GETPVMODEL - Get the model value |
getturns | GETTURNS - Single particle tracking for multiple turns |
gettwiss | GETWISS - Calculate the twiss parameters |
gotoat | |
isradiationon | ISRADIATIONON - 1 if a radiation passmethod is found |
linepass1turn | LINEPASS1TURN - Track particle forward or backwards in one turn of the ring |
linopt2 | LINOPT2 performs linear analysis of the COUPLED lattice RING |
loadat | LOADAT - reload AT model using AD.ATModel |
loadthering | LOADTHERING - Loads the THERING from a .mat file |
machine_at | MACHINE_AT - Returns the optics function as a structure |
mksrollmat | MKSROLLMAT - Rotation matrix around s-axis |
modelDA | modelDA( r0, nsteps, nturns, dp, res) |
modelbeta | MODELBETA - Returns the beta function of the model |
modelchro | MODELCHRO - Returns the AT model chromaticity |
modelchrosensitivity | TUNESENSITIVITY - Computes sextupole change for a given dxi |
modelcurlh | MODELCURLH - Computes and plots the H-curl functions |
modeldisp | MODELDISP - Returns the dispersion function of the model |
modelmcf | MODELMCF - Momentum compaction factor (MCF) of the model |
modelphase | MODELBETA - Returns the Phase function of the model |
modelsextu_off | MODELSEXTU_OFF - Turns on sextupoles in the AT model |
modelsextu_on | MODELSEXTU_ON - Turns on sextupoles in the AT model |
modeltune | MODELTUNE - Returns the model tune (2x1 vector) |
modeltunesensitivity | TUNESENSITIVITY - Computes quadrupole change for a given dnu |
modeltwiss | MODELTWISS - Returns a twiss function of the model |
multiturnfft | MULTITURNFFT - Takes the FFT of multiple turn data (plots results if no output exists) |
plotbeta | PLOTBETA - plots UNCOUPLED! beta-functions |
plotbeta2 | PLOTBETA(RING) finds and plots bea-functions of RING |
plotbeta_alex | PLOTBETA - plots UNCOUPLED! beta-functions |
plotcod | PLOTCOD Closed Orbit Distortion |
plotcod_alex | PLOTCOD Closed Orbit Distortion |
ploteta | PLOTETA plots UNCOUPLED! eta-functions |
plotmodelorbit | PLOTMODELORBIT - Plot closed orbit distortion |
plottwiss | PLOTTWISS - Plot the optical functions and tune of the present lattice |
printlattice | PRINTLATTICE - Simple printout of the elements of the model |
quadalign | QUADALIGN - Locates quadrupoles in AO and apply random alignment |
quadroll | locate quadrupoles in AO and apply random roll about s-axis |
radiationoff | RADIATIONOFF - Turns classical radiation off in the model |
readmad | READMAD reads the file output of MAD commands |
refreshthering | REFRESHTHERING - Run the default AT deck |
savethering | SAVETHERING - Saves the THERING to a .mat file |
setatfield | SETATFIELD - Returns the contents of an AT model field |
setcavity | SETCAVITY - Set the RF cavity state |
setenergymodel | SETENERGYMODEL -set energy in AT model |
setlocodata | SETLOCODATA - Applies the LOCO calibration data to both the middle layer & the accelerator |
setpassmethod | SETPASSMETHOD - Sets the PassMethod |
setpvmodel | SETPVMODEL - Sets the model |
setradiation | SETRADIATION - Sets the model PassMethod to include or exclude radiation ('On' / 'Off' {Default}) |
skewquad | skewquad(Fname, L, Qs, method) |
solerror | % In Tracy or AT for rotation, the beam is rotated and not the element |