source: Sophya/trunk/AddOn/TAcq/tmtacq.cc@ 3808

Last change on this file since 3808 was 3671, checked in by ansari, 16 years ago
  • Nettoyage complet des programmes d'acquisition
  • Ajout methode BRPaquet::CopyFrom() pour reduction de paquet
  • Introduction des classes BRParList , BRConfList , BRAcqConfig
  • Introduction du nouveau programme acquisition mfacq.cc (MultiFibresAcq)

Reza, 13/11/2009
File size: 22.5 KB
Line 
1#include <iostream>
2#include <stdlib.h>
3#include <string.h>
4#include <typeinfo>
5
6#include "tmtacq.h"
7#include "racqumem.h"
8#include "racqurw.h"
9#ifndef NOPCIECARD
10#include "racquwbin.h"
11#include "dmamgrv3.h"
12#endif
13#include "racquproc.h"
14
15
16#include "pciewrap.h"
17#include "brpaqu.h"
18#include "minifits.h"
19
20#include "resusage.h"
21#include "ctimer.h"
22#include "timing.h"
23
24#include "tarrinit.h"
25#include "fiosinit.h"
26
27using namespace std;
28using namespace SOPHYA;
29
30
31//-----------------------------------------------------------------------
32// Programme test acquisition BAORadio multi-thread
33// LAL - R. Ansari Juillet - 2008
34// M.Taurigna 2009
35// == Programme reste a la version de Mai 2009 (1er tests Pittsburgh) ==
36//-----------------------------------------------------------------------
37
38
39/* Fonction d'arret par Ctl<C> et ses pointeurs globaux */
40static DataSaver *pDs = NULL;
41static DataSaver *pDs2 = NULL;
42static PCIEReaderChecker *pPcierc = NULL;
43static PCIEReaderChecker *pPcierc2 = NULL;
44static PCIEReader *pPcier = NULL;
45static PCIEReader *pPcier2 = NULL;
46static DataProc2C *pPr = NULL;
47static DataProc2C *pPr2 = NULL;
48static DataProcFFT2C *pPrfft = NULL;
49static DataProcFFT2C *pPrfft2 = NULL;
50static RAcqMemZoneMgr *pMmgr = NULL;
51static RAcqMemZoneMgr *pMmgr2 = NULL;
52
53void Stop(int s)
54{
55 if (s == 9765) cout << " Stop after exception ..." << endl;
56 else printf("............. MAIN ... receive signal %d \n",s);
57 if (pPcierc != NULL) pPcierc->Stop();
58 if (pPcierc2 != NULL) pPcierc2->Stop();
59 if (pPcier != NULL) pPcier->Stop();
60 if (pPcier2 != NULL) pPcier2->Stop();
61 if (pPr !=NULL) pPr->Stop();
62 if (pPr2 !=NULL) pPr2->Stop();
63 if (pPrfft !=NULL) pPrfft->Stop();
64 if (pPrfft2 !=NULL) pPrfft2->Stop();
65 if (pDs != NULL) pDs->Stop();
66 if (pDs2 != NULL) pDs2->Stop();
67 if (pMmgr !=NULL) pMmgr->Stop();
68 if (pMmgr2 !=NULL) pMmgr2->Stop();
69
70}
71
72#ifndef NOPCIECARD
73// Declaration des fonctions pour DMAMgr... firmware V51
74PCIEWrapperInterface* CreatePCIEWrapperV5F1( UINT32 numcard , UINT32 patternsize,
75 UINT32 dmasz, bool activpatt=false);
76void DeletePCIEWrapperV5F1(UINT32 numcard);
77PCIEWrapperInterface* CreatePCIEWrapperV5F2( UINT32 numcard , UINT32 patternsize,
78 UINT32 dmasz, bool activpatt=false);
79void DeletePCIEWrapperV5F2(UINT32 numcard);
80#endif
81
82/* -------------------------------------------------------- */
83
84// Fonctions appelees par le main
85void Usage(bool fgshort=true);
86int DecodeArgs(int narg, char* arg[]);
87void DecodeAcqMode();
88
89int MonoCardAcq();
90int MultiCardAcq();
91
92//------------------ Parametres de controle ----------------------------
93static string acqmode;
94static int fibre = 0; // =0 firmware pciexpress V496, =1 V51, fibre 1, =2 V51, fibre 2
95static bool savesigfits = true;
96static bool fgnulldev4fits = false;
97static BRDataFmtConv swapall = BR_Copy;
98static bool monothr = false;
99static string OutPathName;
100static string ProcPathName;
101static bool singlecard = true;
102static int cardlist[4] = {1,1,1,1};
103static int card = 1;
104static unsigned int sizeFrame = 4096;
105static unsigned int nbFrameDMA = 32;
106static int NbFiles=1;
107static int NBlocPerFile=10;
108static int NMaxProc = 0; // Nombre de blocs traites par le thread de calcul
109static uint_4 nZones = 4; // Nombre de zones memoires
110static uint_4 nPaqZone = 128; // 128 Paquets / zone memoire - valeur par defaut
111static bool fg_hard_ctrlc = false;
112static uint_4 PaqSZ = 4096; // Taille de paquets
113 // uint_4 dmaSize = nbFrameDMA*PaqSZ ; // plantage
114static uint_4 dmaSize = 32*1024 ;
115static uint_4 patternSZ=0x400; // pas utilise avec la fibre
116static bool activate_pattern=false; // true -> on active le pattern du firmware au lieu de la fibre
117static uint_4 NMaxBloc = 10;
118static double nopciLossRate = 0.; // Taux de perte simule des paquets par TestPCIWrapperNODMA
119//---------------------------- FIN parametres de controle -----------------
120
121//-----------------------------------------------------------------------
122//-------------------- le programme principal ---------------------------
123//-----------------------------------------------------------------------
124int main(int narg, char* arg[])
125{
126
127 int rc = 0;
128 cout << " ============ BAORadio / Acquisition : tmtacq =================" << endl;
129 cout << " ===============================================================" << endl;
130 cout << " ========= " <<BAOR_ACQ_VER_STR <<BAOR_ACQ_VER <<" ===========" << endl;
131 cout << " ===============================================================" << endl;
132
133 int rcda = DecodeArgs(narg, arg);
134 if (rcda != 0) return 1;
135 InitTim();
136
137 // Initialisation
138 TArrayInitiator _arri;
139 FitsIOServerInitiator _fiosi;
140
141 try {
142 if (singlecard) rc = MonoCardAcq();
143 else rc = MultiCardAcq();
144 }
145 catch (MiniFITSException& exc) {
146 cerr << " tmtacq.cc catched MiniFITSException " << exc.Msg() << endl;
147 Stop(9765);
148 rc = 77;
149 }
150 catch (PCIEWException& exc) {
151 cerr << " tmtacq.cc catched MiniFITSException " << exc.Msg() << endl;
152 Stop(9765);
153 rc = 75;
154 }
155 catch (PThrowable& exc) {
156 cerr << " tmtacq.cc catched Exception " << exc.Msg() << endl;
157 Stop(9765);
158 rc = 76;
159 }
160 catch (std::exception& sex) {
161 cerr << "\n tmtacq.cc std::exception :"
162 << (string)typeid(sex).name() << "\n msg= "
163 << sex.what() << endl;
164 Stop(9765);
165 rc = 78;
166 }
167 catch (...) {
168 cerr << " tmtacq.cc : Catched ... exception " << endl;
169 Stop(9765);
170 rc = 79;
171 }
172 cout << "tmtacq[9] ----- END --- stopping acq program " << endl;
173 return rc;
174}
175
176
177/* --Nouvelle-Fonction-- */
178void Usage(bool fgshort)
179{
180 if (fgshort) {
181 cout << " Usage: tmtacq CardNum PaquetSize NFrameDMA NFiles NBlocPerFile \n"
182 << " NMaxProc DataDirPath [AcqMode] [MemZoneMgr] [HardCtlC] [NoPCILossRate]" << endl;
183 cout << " type tmtacq -h for detailed usage " << endl;
184 return;
185 }
186
187 cout << "\n Usage: tmtacq CardNum PaquetSize NFrameDMA NFiles NBlocPerFile \n"
188 << " NMaxProc DataDirPath [AcqMode] [MemZoneMgr] [HardCtlC] [NoPCILossRate]" << endl;
189 cout << " - CardNum : PCI-Express card number (=1 OR 2 OR 1,2)" << endl;
190 cout << " - PaquetSize or FrameSize (=DATA+HDR+TRL_Size) " << endl;
191 cout << " - NFrameDMA = DMASize= NFrameDMA*1024 , 4KO<=MaxDMASize<=64 ko " << endl;
192 cout << " - NFiles = Number of data files produced " << endl;
193 cout << " - NBlocPerFile = Number of memory data bloc in one file " << endl;
194 cout << " - NMaxProc = Max number of memory data blocs processed (FFT ...) " << endl;
195 cout << " NMaxProc=0 -> No Processing " << endl;
196 cout << " - DataDirPath : Subdirectory of /Raid " << endl;
197 cout << " specify /dev/null for performance tests ( ./XZXZXZX/ then used for other files)" << endl;
198 cout << " - AcqMode: Acquisition mode for the firmware V=496 (manages 64bits-byteswap)"<<endl;
199 cout << " (V=496) AcqMode: std=nosw, fft1c, fft2c "<<endl;
200 cout << " std=nosw: Standard Acquisition, Raw data "<<endl;
201 cout << " fft1c,fft2c: Standard Acquisition, FFT data "<<endl;
202 cout << " (V=496) For debug/performance measurement "<<endl;
203 cout << " nof,fft1cnof,fft2nof: raw/fft data, dont write files "<<endl;
204 cout << " mono-> Single thread PCIEReaderChecker, copy packets" << endl;
205 cout << " pattern: activate pattern, and write fits files "<<endl;
206 cout << " pattnof: activate pattern, NO fits files written "<<endl;
207 cout << " pattmono: activate pattern, Single thread, copy packets "<<endl;
208 cout << " - AcqMode: Acquisition mode for the firmware V=51 (2 fibers)"<<endl;
209 cout << " (V=51) f1.std,f2.std, f1.fft1c, f2.fft1c, f1.fft2c f2.fft2c"<<endl;
210 cout << " (V=51) f1.nof,f2.nof,f1.mono,f2.mon fft1cnof,fft2nof "<<endl;
211 cout << " - MemZoneMgr: nZones,NPaq =Number of Zones and number of paquet \n"
212 << " in each zone (Default=4,128) "<< endl;
213 cout << " - HardCtlC : Y y (direct interrpution by CtrlC ) or no (default=no) " << endl;
214 cout << " - NoPCILossRate : Simulated NO-PCI loss rate (0<rate<1 default=0.) " << endl;
215
216 cout << endl;
217 cout << " - AcqMode for previous firmware with 32bits-byteswap"<<endl;
218 cout << " AcqMode : swap32, nof32, fft1c32 , fft2c32,fft1cnof32 , fft2cnof32 " <<endl;
219 cout << " - AcqMode for previous firmware without any byte-swap"<<endl;
220 cout << " AcqMode : swapall, fft1csw , fft2csw, swapallnof, swh, mxs, monosw" << endl;
221 return;
222}
223
224/* --Nouvelle-Fonction-- */
225int DecodeArgs(int narg, char* arg[])
226{
227 if ((narg>1)&&(strcmp(arg[1],"-h")==0)) {
228 Usage(false);
229 return 1;
230 }
231 if (narg < 8) {
232 Usage(true);
233 return 1;
234 }
235
236 acqmode = "std";
237 fibre = 0; // firmware V496
238 if (narg>8) acqmode = arg[8];
239 savesigfits = true;
240 // BRDataFmtConv swapall = BR_SwapAll;
241 swapall = BR_Copy;
242 monothr = false;
243 DecodeAcqMode();
244
245 if (index(arg[1],',') != NULL) {
246 sscanf(arg[1],"%d,%d", cardlist, cardlist+1);
247 cout << " tmtacq[1]/MultiPCICard acquisition ... Cards= " << cardlist[0] << " ," << cardlist[1]
248 << " FrameSize=PaqSize=" << sizeFrame << endl;
249 singlecard = false;
250 }
251 else {
252 card = atoi(arg[1]);
253 cardlist[0] = cardlist[1] = card;
254 singlecard = true;
255 cout << "tmtacq[1]/MonoPCICard acquisition ... Card= " << card << " FrameSize=PaqSize=" << sizeFrame << endl;
256 }
257 sizeFrame = atoi(arg[2]);
258 nbFrameDMA = atoi(arg[3]);
259
260
261 NbFiles = atoi(arg[4]);
262 NBlocPerFile = atoi(arg[5]);
263 NMaxProc = atoi(arg[6]); // Nombre de blocs traites par le thread de calcul
264
265 OutPathName = arg[7];
266 fgnulldev4fits = (OutPathName == "/dev/null") ? true : false;
267 if (!fgnulldev4fits) {
268#ifdef NOPCIECARD
269 OutPathName = OutPathName+"/";
270#else
271 OutPathName =string("/Raid/")+OutPathName+"/";
272#endif
273 ProcPathName = OutPathName;
274 }
275 cout << " DataDirpath=" << OutPathName << " SwapMode=" << BRPaquet::FmtConvToString(swapall)
276 << " DataSaveMode=" << ((savesigfits)?"Yes/FitsFile":"NO") << endl;
277
278 if (!fgnulldev4fits) {
279 char cmd[512];
280 if (singlecard) {
281 sprintf(cmd,"mkdir %s",OutPathName.c_str());
282 if (system(cmd) < 0) {
283 cout << "tmtacq/Error: Can not create subdirectory " << OutPathName << " -> exit" << endl;
284 return 2;
285 }
286 else cout << " tmtacq[1] - Executed command " << cmd << endl;
287 }
288 else {
289 sprintf(cmd,"mkdir %s",OutPathName.c_str());
290 if (system(cmd) < 0) {
291 cout << "tmtacq/Error: Can not create subdirectory " << OutPathName << " -> exit" << endl;
292 return 2;
293 }
294 else cout << " tmtacq[1] - Executed command " << cmd << endl;
295 sprintf(cmd,"mkdir %s/Card1",OutPathName.c_str());
296 if (system(cmd) < 0) {
297 cout << "tmtacq/Error: Can not create subdirectory " << OutPathName << " -> exit" << endl;
298 return 2;
299 }
300 else cout << " tmtacq[1] - Executed command " << cmd << endl;
301 sprintf(cmd,"mkdir %s/Card2",OutPathName.c_str());
302 if (system(cmd) < 0) {
303 cout << "tmtacq/Error: Can not create subdirectory " << OutPathName << " -> exit" << endl;
304 return 2;
305 }
306 else cout << " tmtacq[1] - Executed command " << cmd << endl;
307 }
308 }
309 else {
310 ProcPathName = "./XZXZXZX/";
311 cout << " Using " << ProcPathName << " for other processed files ... " << endl;
312 char cmd[512];
313 sprintf(cmd,"mkdir %s",ProcPathName.c_str());
314 system(cmd);
315 if (!singlecard) {
316 sprintf(cmd,"mkdir %s/Card1 %s/Card2",ProcPathName.c_str(),ProcPathName.c_str());
317 system(cmd);
318 }
319 }
320
321 nZones = 4; // Nombre de zones memoires
322 nPaqZone = 128; // 128 Paquets / zone memoire - valeur par defaut
323 if (narg > 9) {
324 int ia1, ia2;
325 sscanf(arg[9],"%d,%d", &ia1, &ia2);
326 nZones = ia1; nPaqZone = ia2;
327 }
328
329 fg_hard_ctrlc = false;
330
331 struct sigaction act;
332
333 if (narg > 10) // pour traiter eventuellement un arret brutal par CtlC mettre le 10eme arg a Y
334 if ((*arg[10]=='y')||(*arg[10]=='Y')) fg_hard_ctrlc=true;
335 if (!fg_hard_ctrlc) {
336 act.sa_handler=Stop;
337 sigaction(SIGINT,&act,NULL);
338 }
339
340 nopciLossRate = 0.; // Taux de perte simule des paquets par TestPCIWrapperNODMA
341 if (narg > 11) nopciLossRate=atof(arg[11]);
342
343 PaqSZ =sizeFrame; // Taille de paquets
344 // uint_4 dmaSize = nbFrameDMA*PaqSZ ; // plantage
345 dmaSize = nbFrameDMA*1024 ;
346 patternSZ=(sizeFrame-40)/4; // pas utilise avec la fibre
347 NMaxBloc = NbFiles*NBlocPerFile;
348 cout << "tmtacq[2] - PaqSize = " << PaqSZ << " NbPaq/Zone=" << nPaqZone << " NZones=" << nZones << endl;
349 cout << " NbFiles=" << NbFiles << " NBloc/File=" << NBlocPerFile << " -> NMaxBloc=" << NMaxBloc << endl;
350 cout << "tmtacq[2] NbFrameDMA=" << nbFrameDMA << " DMASize=" << dmaSize << " bytes" << endl;
351 cout << "tmtacq[2] NMaxProc=" << NMaxProc << endl;
352
353 return 0;
354}
355
356/* --Nouvelle-Fonction-- */
357void DecodeAcqMode()
358{
359 if (acqmode.substr(0,3)=="f1.") {
360 fibre=1, acqmode=acqmode.substr(3);
361 cout << " DecodeAcqMode() -> firmware pci-express V51, fibre 1" << endl;
362 }
363 if (acqmode.substr(0,3)=="f2.") {
364 fibre=2, acqmode=acqmode.substr(3);
365 cout << " DecodeAcqMode() -> firmware pci-express V51, fibre 2" << endl;
366 }
367 if (acqmode == "nosw") swapall = BR_Copy ;
368 if (acqmode == "nof") { swapall = BR_Copy ; savesigfits = false; }
369 if (acqmode == "fft1c") swapall = BR_FFTOneChan;
370 if (acqmode == "fft2c") swapall = BR_FFTTwoChan;
371 if (acqmode == "fft1cnof") { swapall = BR_FFTOneChan; savesigfits = false; }
372 if (acqmode == "fft2cnof") { swapall = BR_FFTTwoChan; savesigfits = false; }
373 if (acqmode == "mono") { monothr = true; swapall = BR_Copy; }
374 if (acqmode == "patmono") { monothr = true; swapall = BR_Copy; activate_pattern=true; }
375 if (acqmode == "patnof") { savesigfits = false; swapall = BR_Copy; activate_pattern=true; }
376 if (acqmode == "pattern") { savesigfits = true; swapall = BR_Copy; activate_pattern=true; }
377
378 if (acqmode == "swapall") swapall = BR_SwapAll;
379 if (acqmode == "fft1csw") swapall = BR_FFTOneChanSwapAll;
380 if (acqmode == "fft2csw") swapall = BR_FFTTwoChanSwapAll;
381 if (acqmode == "fft1cswnof") { swapall = BR_FFTOneChanSwapAll; savesigfits = false; }
382 if (acqmode == "fft2cswnof") { swapall = BR_FFTTwoChanSwapAll; savesigfits = false; }
383 if ((acqmode == "swh") || (acqmode == "mxs") || (acqmode == "monoswh") ) swapall = BR_SwapHDR;
384 if ((acqmode == "swapallnof") || (acqmode == "mxs") ) savesigfits = false;
385 if (acqmode == "monoswh") { monothr = true; swapall = BR_SwapHDR;; }
386 if (acqmode == "monosw") { monothr = true; swapall = BR_SwapAll; }
387
388 if (acqmode == "swap32") swapall = BR_Swap32 ;
389 if (acqmode == "nof32") { swapall = BR_Swap32 ; savesigfits = false; }
390 if (acqmode == "fft1c32") swapall = BR_FFTOneChanSwap32;
391 if (acqmode == "fft2c32") swapall = BR_FFTTwoChanSwap32;
392 if (acqmode == "fft1cnof32") { swapall = BR_FFTOneChanSwap32; savesigfits = false; }
393 if (acqmode == "fft2cnof32") { swapall = BR_FFTTwoChanSwap32; savesigfits = false; }
394
395}
396
397
398/* --Nouvelle-Fonction-- */
399int MonoCardAcq()
400{
401 Timer tm("tmtacq/MonoCard");
402
403 cout << " ---- tmtacq/ MonoCardAcq() ------------- " << endl;
404
405 PCIEWrapperInterface* pciwp=NULL;
406#ifdef NOPCIECARD
407 TestPCIWrapperNODMA pciw(PaqSZ,nopciLossRate);
408 pciwp = &pciw;
409#else
410 DMAMgr* dmap=NULL;
411 if (fibre == 1) {
412 pciwp = CreatePCIEWrapperV5F1(card,patternSZ,dmaSize,activate_pattern);
413 }
414 else if (fibre == 2) {
415 pciwp = CreatePCIEWrapperV5F2(card,patternSZ,dmaSize,activate_pattern);
416 }
417 else {
418 dmap = new DMAMgr(card,patternSZ,dmaSize,activate_pattern);
419 if (!activate_pattern) {
420 if (! dmap->StatusFibre() ) {
421 cout << " tmtacq[3] - fibre non accrochee -> exit " << endl;
422 throw PCIEWException(" Fibre non accrochee ");
423 }
424 else cout << " tmtacq[3] - fibre accrochee OK " << endl;
425 }
426 pciwp = new PCIEWrapper(*dmap);
427 }
428#endif
429 RAcqMemZoneMgr mmgr(nZones, nPaqZone, PaqSZ);
430 pMmgr =&mmgr;
431
432 if (monothr) {
433 cout << "tmtacq[4] single thread PCIE test PCIEReaderChecker ... ";
434 PCIEReaderChecker pcirc(*pciwp,dmaSize,PaqSZ ,mmgr, NMaxBloc, swapall);
435 pPcierc=&pcirc;
436 pcirc.start();
437 sleep(1);
438 pcirc.join();
439 cout << "tmtacq[5] - single thread PCIEReaderChecker finished " << endl;
440 tm.Split("Single Thread Finished");
441 mmgr.Print(cout);
442 return 0;
443 }
444 PCIEReader pcir(*pciwp,dmaSize,PaqSZ ,mmgr, NMaxBloc, swapall);
445 pPcier= &pcir;
446 DataSaver ds(mmgr, OutPathName, NbFiles, NBlocPerFile, savesigfits);
447 pDs= &ds;
448 //DataBinSaver ds(mmgr, OutPathName, NbFiles ,NBlocPerFile);
449 // DataProc1C pr(mmgr, OutPathName, nmean, stepproc, 100); Pour processer un canal
450 int stepproc = 2;
451 int nmean = nPaqZone*NBlocPerFile/stepproc;
452 DataProc2C pr(mmgr, ProcPathName, nmean, stepproc, NMaxProc);
453 DataProcFFT2C prfft(mmgr, ProcPathName, nmean, stepproc, NMaxProc);
454 tm.Split("Threads created");
455 cout << "tmtacq[4] - starting 3 threads pcir, ds, pr ... " << endl;
456 /*
457 char test[100];
458 cout << " <CR> to continue, x to exit ..." << endl;
459 gets(test); if (test[0] == 'x') return 9;
460 */
461 pcir.start();
462 ds.start();
463 if (NMaxProc>0) { // On ne demarre que si au moins NMaxProc>0
464 if (acqmode.substr(0,5)=="fft2c") { prfft.start(); pPrfft=&prfft;}
465 else { pr.start(); pPr=&pr;}
466 }
467 cout << "tmtacq[5] - waiting for threads to finish ... " << endl;
468 sleep(1);
469 pcir.join();
470 ds.join();
471 sleep(1);
472 mmgr.Stop();
473 if (NMaxProc>0) {
474 if ( pPr != NULL) pr.join();
475 if ( pPrfft != NULL) prfft.join();
476 }
477 cout << "tmtacq[6] - threads finished " << endl;
478 tm.Split("Threads Finished");
479 mmgr.Print(cout);
480#ifndef NOPCIECARD
481 if (fibre==0) {
482 delete pciwp;
483 delete dmap;
484 }
485 if (fibre==1) DeletePCIEWrapperV5F1(card);
486 if (fibre==2) DeletePCIEWrapperV5F2(card);
487#endif
488 return 0;
489}
490
491
492/* --Nouvelle-Fonction-- */
493int MultiCardAcq()
494{
495 Timer tm("tmtacq/MultiCard");
496
497 cout << " ---- tmtacq/ MultiCardAcq() ------------- " << endl;
498
499 PCIEWrapperInterface* pciwp1=NULL;
500 PCIEWrapperInterface* pciwp2=NULL;
501
502#ifdef NOPCIECARD
503 TestPCIWrapperNODMA pciw1(PaqSZ,nopciLossRate);
504 TestPCIWrapperNODMA pciw2(PaqSZ,nopciLossRate);
505 pciwp1 = &pciw1;
506 pciwp2 = &pciw2;
507#else
508 DMAMgr* dmap1=NULL;
509 DMAMgr* dmap2=NULL;
510 if (fibre == 1) {
511 pciwp1 = CreatePCIEWrapperV5F1(cardlist[0],patternSZ,dmaSize,activate_pattern);
512 pciwp2 = CreatePCIEWrapperV5F1(cardlist[1],patternSZ,dmaSize,activate_pattern);
513 }
514 else if (fibre == 2) {
515 pciwp1 = CreatePCIEWrapperV5F2(cardlist[0],patternSZ,dmaSize,activate_pattern);
516 pciwp2 = CreatePCIEWrapperV5F2(cardlist[1],patternSZ,dmaSize,activate_pattern);
517 }
518 else {
519 dmap1 = new DMAMgr(cardlist[0],patternSZ,dmaSize,activate_pattern);
520 if (!activate_pattern) {
521 if (! dmap1->StatusFibre() ) {
522 cout << " tmtacq[3] - fibre non accrochee Card" << cardlist[0] << " -> exit " << endl;
523 throw PCIEWException(" Fibre non accrochee 1");
524 }
525 else cout << " tmtacq[3] - fibre accrochee OK Card " << cardlist[0] << endl;
526
527 dmap2 = new DMAMgr(cardlist[1],patternSZ,dmaSize,activate_pattern);
528 if (! dmap2->StatusFibre() ) {
529 cout << " tmtacq[3] - fibre non accrochee Card" << cardlist[1] << " -> exit " << endl;
530 throw PCIEWException(" Fibre non accrochee 2");
531 }
532 else cout << " tmtacq[3] - fibre accrochee OK Card " << cardlist[1] << endl;
533 }
534 pciwp1 = new PCIEWrapper(*dmap1);
535 pciwp2 = new PCIEWrapper(*dmap2);
536 }
537 /*
538 cout << " ---- S to stop , C continue ... " << endl;
539 char ans[64];
540 gets(ans);
541 if ((ans[0] == 'S') || (ans[0] == 's')) return 5;
542 */
543#endif
544 RAcqMemZoneMgr mmgr1(nZones, nPaqZone, PaqSZ);
545 RAcqMemZoneMgr mmgr2(nZones, nPaqZone, PaqSZ);
546 pMmgr =&mmgr1;
547 pMmgr2 =&mmgr2;
548
549 if (monothr) {
550 cout << "tmtacq[4] single thread/Card PCIE test PCIEReaderChecker ... ";
551 PCIEReaderChecker pcirc1(*pciwp1,dmaSize,PaqSZ ,mmgr1, NMaxBloc, swapall);
552 PCIEReaderChecker pcirc2(*pciwp2,dmaSize,PaqSZ ,mmgr2, NMaxBloc, swapall);
553 pPcierc=&pcirc1;
554 pPcierc2=&pcirc2;
555 pcirc1.start();
556 pcirc2.start();
557
558 sleep(1);
559 pcirc1.join();
560 pcirc2.join();
561
562 cout << "tmtacq[5] - single thread/Card PCIEReaderChecker finished " << endl;
563 tm.Split("Single Thread Finished");
564 mmgr1.Print(cout);
565 mmgr2.Print(cout);
566 return 0;
567 }
568 PCIEReader pcir1(*pciwp1,dmaSize,PaqSZ ,mmgr1, NMaxBloc, swapall);
569 pPcier= &pcir1;
570 PCIEReader pcir2(*pciwp2,dmaSize,PaqSZ ,mmgr2, NMaxBloc, swapall);
571 pPcier2= &pcir2;
572 char buff[32];
573 sprintf(buff, "Card%d", cardlist[0]);
574 string path1 = OutPathName + buff;
575 string ppath1 = ProcPathName + buff;
576 DataSaver ds1(mmgr1, path1, NbFiles, NBlocPerFile, savesigfits);
577 pDs= &ds1;
578 sprintf(buff, "Card%d", cardlist[1]);
579 string path2 = OutPathName + buff;
580 string ppath2 = ProcPathName + buff;
581 DataSaver ds2(mmgr2, path2, NbFiles, NBlocPerFile, savesigfits);
582 pDs2= &ds2;
583 //DataBinSaver ds(mmgr, OutPathName, NbFiles ,NBlocPerFile);
584 // DataProc1C pr(mmgr, OutPathName, nmean, stepproc, 100); Pour processer un canal
585 int stepproc = 2;
586
587 int nmean = nPaqZone*NBlocPerFile/stepproc;
588 DataProc2C pr1(mmgr1, ppath1, nmean, stepproc, NMaxProc);
589 DataProcFFT2C prfft1(mmgr1, ppath1, nmean, stepproc, NMaxProc);
590 DataProc2C pr2(mmgr2, ppath2, nmean, stepproc, NMaxProc);
591 DataProcFFT2C prfft2(mmgr2, ppath2, nmean, stepproc, NMaxProc);
592
593 tm.Split("Threads created");
594 cout << "tmtacq[4] - starting 3 threads pcir, ds, pr ... " << endl;
595 /*
596 char test[100];
597 cout << " <CR> to continue, x to exit ..." << endl;
598 gets(test); if (test[0] == 'x') return 9;
599 */
600 pcir1.start();
601 ds1.start();
602 pcir2.start();
603 ds2.start();
604 if (NMaxProc>0) { // On ne demarre que si au moins NMaxProc>0
605 if (acqmode.substr(0,5)=="fft2c") {
606 prfft1.start(); pPrfft=&prfft1;
607 prfft2.start(); pPrfft2=&prfft2;
608 }
609 else {
610 pr1.start(); pPr=&pr1;
611 pr2.start(); pPr2=&pr2;
612 }
613 }
614 cout << "tmtacq[5] - waiting for threads to finish ... " << endl;
615 sleep(1);
616 pcir1.join();
617 ds1.join();
618 pcir2.join();
619 ds2.join();
620 sleep(1);
621 mmgr1.Stop();
622 mmgr2.Stop();
623 if (NMaxProc>0) {
624 if ( pPr != NULL) pr1.join();
625 if ( pPr2 != NULL) pr2.join();
626 if ( pPrfft != NULL) prfft1.join();
627 if ( pPrfft2 != NULL) prfft2.join();
628 }
629
630 cout << "tmtacq[6] - threads finished " << endl;
631 tm.Split("Threads Finished");
632 mmgr1.Print(cout);
633 mmgr2.Print(cout);
634#ifndef NOPCIECARD
635 if (fibre==0) {
636 delete pciwp1;
637 delete dmap1;
638 delete pciwp2;
639 delete dmap2;
640 }
641 if (fibre==1) {
642 DeletePCIEWrapperV5F1(cardlist[0]);
643 DeletePCIEWrapperV5F1(cardlist[1]);
644 }
645 if (fibre==2) {
646 DeletePCIEWrapperV5F2(cardlist[0]);
647 DeletePCIEWrapperV5F2(cardlist[1]);
648 }
649#endif
650 return 0;
651}
Note: See TracBrowser for help on using the repository browser.