wiki:FEBproto3/synchronisation

FEB proto 3 : Synchronization

In the following, the green signal is the reference CROC Global clock signal (CROC quartz), the yellow signal is either the clock of the front-end board, the L0 or the read_command. Green is the trigger for the clock study, the yellow signal is the trigger when looking at the L0 and the Read Command. The time scale is 2ns. The scope remanence is pushed to 1s (clock studies) or infinity (L0 and RdCmd) in order to show clearly the jitter effect.

Jitter Clock

Incoming clock signal taken at the input of the LVDS/unipolar convertor of the board (polarity minus)

Clock signal taken at the output of the clock buffer driver.

Clock signal taken at the output of the Delay chip for ADC 0.

Clock ADC 0 (polarity +).

Clock ADC 0 (polarity -).

Jitter L0

L0 signal at the output of the LVDS/unipolar convertor of the FEB.

L0 signal at the output of the Sequencer : a large (~1ns) djitter appears.

Jitter Read Command

First RdCmd at the output of the Sequencer. The First RdCmd is used as the scope trigger. Large djitter wrt to the CROC clock.

One of the next RdCmd (8?). We have both a djitter wrt the clock (green) but also wrt the first RdCmd still used as the trigger reference. Rd_Cmd have djitters amongs themselves -> no sampling at the output of the sequencer ?

MEASUREMENT OF PULSE SHAPE AT THE OUTPUT OF THE DELAY CHIP M16

Contrary to version II on the Proto III the pulseshape are satisfactory

Output 18

Output 20

Output 22

Output 24

No image "Delay_Chip_Output.bmp" attached to FEBproto3/synchronisation

Last modified 18 years ago Last modified on Dec 22, 2005, 9:25:24 AM

Attachments (15)

Download all attachments as: .zip